LC10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVSs, also known as transient voltage suppression devices, are semiconductor components that are used to protect vulnerable electronic components from damage caused by sudden and large voltage spikes, referred to as transients. TVSs are particularly well-suited for applications where the voltage spike should be prevented from reaching sensitive components.

The TVS diode is a type of semiconductor device used for protecting sensitive electronics from electrostatic discharge (ESD) and electrical overstress (EOS). It is also known as a “Transient Voltage Suppressor” or an “ESD Protection Diode”. All of these names refer to the same device, which is a diode that acts like a surge protector. Its purpose is to clamp the voltage of an incoming surge so that it does not damage the vulnerable electronic components.

The most common type of TVS diode is the LC10. It is a reverse-biased (negative-polarity) unidirectional (nonreciprocating) transient voltage suppressor diode. The working principle of the LC10 is simple: when the voltage exceed a predetermined limit, it will quickly turn on and begin allowing current to flow from the anode to the cathode. This in turn will limit the amount of voltage that can pass through to the important components.

The LC10 is typically used in applications where the circuit is expected to experience voltage transients up to 1000 Volts. The device allows low voltage, controlled current to pass through, but will clamp high voltage, uncontrolled pulses. This is why the LC10 is popular for automotive and industrial applications, as well as in communications, computers, appliances, ac/dc converters, motor drives, and any other system that requires protection from high voltage transients.

One unique feature of the LC10 is that it can be used to protect circuits from positive or negative transients. It has a low voltage clamping range of 16 to 1000V and a current capability of up to 800mA. This makes the LC10 ideal for applications such as communication interfaces, power supplies, motor drives, and battery packs.

In summary, the LC10 is a popular transient voltage suppressor diode that is used in many applications where protection from voltage transients is needed. It has a low voltage clamping range and a high current capability, making it suitable for a variety of applications. It is a unidirectional diode, which means it is designed to only conduct current in one direction, thus preventing damaging surges of voltage from passing through the circuit. This makes the LC10 one of the most reliable and effective transient voltage suppression solutions available.

The specific data is subject to PDF, and the above content is for reference