LCD6-10B-L Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LCD6-10B-L is a two-pole nozzle, metal case and block type rectangular power connectors with two notch manuvers. The product has a maximum voltage rating of 600 V and is approved for CSA certification (Class I, II, III, Division 1). It has a current rating up to 10A at 250 VAC, and a temperature rating of -40°C to 125°C. The top of the housing has six screws with 12mm thread and 12mm of insulation.

The LCD6-10B-L is suitable for direct wire-to-board applications where a reliable and space-saving connection is needed. It offers reliable contact protection for circuits with large current ratings and vibration resistance for shock and vibration environments. This rigid contact is compatible with DIN standard housings for standard DIN connectors.

The LCD6-10B-L is used in a wide range of applications including:

• Automation systems.
• Power transmission and distribution.
• Motors and drives.
• Generators.
• Vehicles.
• Lighting fixtures.
• Industrial equipment.
• Construction sites.

• Insulation: Exceeds UL94V-0.
• Rated Voltage: 600 VAC.
• Mounting Torque: 2.5 Nm.
• Current Rating: Up to 10 A at 250VAC.
• Ambient Temperature Range: -40°C to 125°C.
• Contact Resistance: 5 mΩ (maximum).
• Insulator Resistance: 500MΩ (minimum).
• Vibration Resistance: To 5Hz.

The LCD6-10B-L is a two-pole, block type rectangular connector and has two notch manuvers. It is designed to accept 2.5mm² strands, and each contact screws directly into the housing and maximum retention force must not exceed 2.5Nm. The insulation between the contacts and the housing is 12mm, this gives us a good level of isolation when the connector is mated.

When the connector is mated, each contact is first pushed up against the contact of the other connector. Then, each contact is secured in place with screws until the contact pads touch each other. The screws ensure the contacts remain in place and the contact pads maintain pressure on the opponent’s contact to ensure good connection. The insulation between the contacts and the housing prevents any electrical leakage or shorts.

The LCD6-10B-L is a two-pole, block type rectangular connector and is designed for direct wire-to-board applications. It is approved for CSA certification and can handle up to 10A at 250VAC. The screw mounting ensures the contacts remain in place and the insulation provides a reliable and space-saving connection. The LCD6-10B-L has a wide range of applications in industrial, commercial, and residential environments.

The specific data is subject to PDF, and the above content is for reference