LDA200

Output Type:	Transistor
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Vce Saturation (Max):	500mV
Current - DC Forward (If) (Max):	1mA
Voltage - Forward (Vf) (Typ):	1.2V
Current - Output / Channel:	--
Voltage - Output (Max):	30V
Series:	--
Input Type:	AC, DC
Rise / Fall Time (Typ):	--
Turn On / Turn Off Time (Typ):	7µs, 20µs
Current Transfer Ratio (Max):	1000% @ 1mA
Current Transfer Ratio (Min):	33% @ 1mA
Voltage - Isolation:	3750Vrms
Number of Channels:	2
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are a type of device used to separate two circuits from each other electrically while allowing them to communicate optically from one another. This is achieved through the use of a light-emitting diode (LED) and a photovoltaic (PV) cell. The LED is used to send a signal to the PV cell, while the PV cell uses the energy from the LED to produce an electric output.Optoisolators are typically used when two pieces of electronic circuitry must be electrically isolated from each other yet continue to communicate either directionally or bidirectionally. The most common applications for optoisolators include digital logic, telecommunications, industrial automation and control, automotive electronics, and medical instrumentation.The device consists of two parts, the input and the output, that are coupled by a light-emitting diode (LED) and a photovoltaic (PV) cell. The LED is used to send a signal into the optoisolator, while the PV cell uses the energy from the LED to produce an electric signal in response. This device is also referred to as a light-activated switch due to the fact that when the input is activated, the output is activated as well.The primary advantage of optoisolators is their ability to provide high levels of electrical insulation between the two parts. This ensures that none of the input signals can pass through to the output, which can be a key factor when dealing with sensitive electronic components. Optoisolator devices are also immune to signal interference from external sources, which allows them to be used in locations that may otherwise be prone to RF and EMI noise.The LDA200 optoisolator is a type of device that provides high levels of electrical isolation while allowing two circuits to communicate bidirectionally. This device consists of a gallium arsenide infrared LED and a six-layer photocoupler IC. The LDA200 has a wide operating temperature range and can be used in either DC or AC applications.The working principle of the LDA200 is fairly simple. The input is connected to an LED within the device, which then emits light. This light is then detected by the PV cell, which then produces an output signal. Depending on the configuration, this output signal can be used in either digital or analog applications. The output signal can be used to control a wide range of electromechanical and electronic systems.The LDA200 is unique among optoisolator devices in that it can support data transmissions of up to 10Mbps. This allows it to be used in high-speed communication applications, such as Ethernet networks and other industrial networks. It is also capable of supporting up to 20 distinct output channels, which makes it capable of controlling multiple systems simultaneously.In conclusion, the LDA200 optoisolator is a device designed to provide a high level of electrical insulation between two circuits while allowing them to communicate bidirectionally. It is primarily designed to be used in digital and analog applications, with its signal transmission rate of up to 10Mbps. It has a wide operating temperature range and can support up to 20 distinct output channels. This makes it an invaluable tool in the field of optoisolators.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description