LDD211G4003A-087

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF filters are applied in the communication systems that require a level of performance that far exceeds an ordinary filter in terms of frequency response, Selectivity, shape factor, and insertion loss. The LDD211G4003A-087 is a high performance RF filter developed by ALD, Inc. This filter features a Low Pass design with a center frequency of 877 MHz, bandwidth of 200 MHz and high rejection.The LDD211G4003A-087 consists of multiple cavity stages spaced at quarter wavelengths of one or more frequencies. Each stage consists of a metal box or “cavity” that contains an inductor-capacitor (LC) circuit. The LC circuits are arranged to pass a certain frequency with low loss, while rejecting other frequencies. Each cavity is spaced at a quarter wavelength from the next cavity, and the center of the filter is often at one of the stages.The main purpose of the LDD211G4003A-087 is to reduce interference between incoming and outgoing signals in the radio frequency (RF) domain. It is often used by radio engineers who need to filter out unwanted frequencies. The filter can reject signals from the neighboring channel while passing the desired channel with low loss. This helps to improve the signal-to-noise ratio, since the undesired signals are blocked.Aside from its main function as a filter, the LDD211G4003A-087 also has a number of other applications. It can be used as an amplifier to boost the power of certain frequencies. It can also be used as an attenuator to reduce the power of certain frequencies. In addition, the filter can be used to compensate for the frequency response of other components in a system, such as antennas, coaxial cables, and amplifiers.In general, the working principle of the LDD211G4003A-087 is quite simple. Since the cavities are spaced at quarter wavelengths, they form a low pass filter. The higher frequencies are blocked, while the lower frequencies pass through with low loss. This creates a sharp transition between the passband and the stopband, allowing for very high levels of selectivity.To control the parameters of the filter, the exact length of each cavity is adjusted. By adjusting the length of each cavity, the designer can control the center frequency, bandwidth, and rejection of the filter. It is important to note that the interactive effect of the cavities must be considered when changing individual cavity parameters. In addition, the circuit elements in each cavity must be tuned to ensure that the desired frequency response is achieved.In conclusion, the LDD211G4003A-087 is a high performance RF filter that is designed to reduce interference between incoming and outgoing signals in the RF domain. It works by creating a low pass filter which blocks the higher frequencies and allows the lower frequencies to pass through with low loss. It can also be used as an amplifier, attenuator, or frequency response compensator. By adjusting the length of each cavity and the circuit elements in each cavity, the designer can control the center frequency, bandwidth, and rejection of the filter.

The specific data is subject to PDF, and the above content is for reference