LDD212G1403A-075

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LDD212G1403A-075 is an RF filter used in radio frequency applications. The device is comprised of two basic components: a low-pass filter and a band-pass filter. The low-pass filter section consists of two resonators connected in series. These resonators are designed to have a cutoff frequency of 75 MHz. The band-pass filter consists of a series of parallel resonators. The resonators used in the band-pass filter are designed to have a center frequency of approximately 35 MHz.

These two components are then incorporated onto a single package. The low-pass filter section is connected to one of the input pins of the package while the band-pass filter is connected to the other input pin. The output of the device is the combination of the outputs of both the low-pass and band-pass filters. In this way, a signal entering the device is both filtered and amplified before it is output.

This filtering action serves several applications in radio frequency engineering. For example, in short wave radio receivers, the LDD212G1403A-075 can be used to filter out unwanted frequencies and amplify desired frequencies. In wireless communications, they are also useful for selecting specific communication channels and blocking out undesired signals. The device can also be used in signal conditioning for various instrumentation applications.

On the technical side, the working principle of the LDD212G1403A-075 is based on the insertion loss of its low-pass filter and band-pass filter components. The low-pass filter section provides the device with its initial filtering action, while the band-pass filter section helps to further enhance the filtering and amplification capabilities of the device. The combined effect of these components is the overall insertion loss of the device. This insertion loss is the difference between the input and output levels of the device.

The LDD212G1403A-075 is a versatile RF filter device that can be used in a variety of applications. Its two basic components – the low-pass filter and band-pass filter – work together to provide a wide range of filtering and amplification capabilities that make it suitable for wide range of radio frequency applications.

The specific data is subject to PDF, and the above content is for reference