LEV100A6ANG

Series:	LEV100, KILOVAC
Packaging:	Bulk
Part Status:	Active
Mounting Type:	Chassis Mount
Coil Voltage:	48VDC
Contact Form:	SPST-NO (DM) (1 Form X)
Contact Rating (Current):	100A
Switching Voltage:	900VDC - Max
Features:	Sealed - Hermetically
Termination Style:	Stud
Operating Temperature:	-40°C ~ 85°C
Turn On Voltage (Max):	33 VDC
Turn Off Voltage (Min):	4.8 VDC
Contact Material:	--
Operate Time:	25ms
Release Time:	10ms
Coil Current:	122mA
Coil Power:	6 W
Coil Resistance:	392 Ohms

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A contactor is an electromagnetic device used to interrupt or establish a circuit or switch an electrical load. It is an electromechanical device used for controlling a large amount of electrical power. The LEV100A6ANG contactor is a 6-pole contactor, the latest addition to the Leviton line of Heavy Industrial devices, widely used in industrial and commercial heating, ventilation, and air conditioning (HVAC) applications. In this article, we will discuss the application field and working principle of the LEV100A6ANG contactor.

Application Field of LEV100A6ANG Contactor

The LEV100A6ANG contactor is a 6-pole contactor that is designed for use in industrial and commercial HVAC applications. It is a safe and reliable solution for controlling motor loads at a short circuit capacity up to 50kA. It is suitable for controlling medium-to-large motors, such as compressors, air handlers, chillers, and other HVAC equipment. It is also UL and CSA approved, and has a low-voltage power rating of 600VH.The LEV100A6ANG contactor has a wide range of applications, including but not limited to the following:• Motor control in HVAC, pump, and fan applications• Switching of heating and cooling loads• Power control of lighting and other loads• Startup and shutdown control of motors

Working Principle of LEV100A6ANG Contactor

The LEV100A6ANG contactor works on the principle of electromagnetic induction. An electric current is sent through a coil which creates a magnetic field which then attracts the movable contactor and thus switches on the connected loads. This is known as “make” or “break” contact.When there is a requirement to switch off or control the connected loads, the power supply is disconnected from the coil. The current stops flowing, and the magnetic field collapses. As a result, the movable contactor is released, and the connected loads are now switched off. This is known as “interrupt” or “open” contact.The LEV100A6ANG contactor has a maximum power rating of 415A/600VH, and can handle short circuit capacity up to 50kA. It is also equipped with a manual override switch to manually open and close the contactor.

Conclusion

The LEV100A6ANG contactor is a 6-pole contactor that is designed for use in industrial and commercial HVAC applications. It works on the principle of electromagnetic induction, where an electric current is sent through a coil to create a magnetic field to attract the movable contactor. This allows the contactor to switch on and off the connected loads. The LEV100A6ANG contactor has a maximum power rating of 415A/600VH and can handle short circuit capacity up to 50kA.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description