LL103C-GS18 Discrete Semiconductor Products

Series:	Automotive, AEC-Q101
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	20V
Current - Average Rectified (Io):	200mA
Voltage - Forward (Vf) (Max) @ If:	600mV @ 200mA
Speed:	Small Signal =
Reverse Recovery Time (trr):	10ns
Current - Reverse Leakage @ Vr:	5µA @ 10V
Capacitance @ Vr, F:	50pF @ 0V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	DO-213AC, MINI-MELF, SOD-80
Supplier Device Package:	SOD-80 MiniMELF
Operating Temperature - Junction:	125°C (Max)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single A single diode rectifier is a commonly used electrical component. It is used to convert alternating current (AC power) into direct current (DC power). It has a wide range of applications in the electronics industry, especially in automotive and aerospace systems. One of the most widely used single diode rectifiers is designated by its part number, LL103C-GS18. In this article we will discuss the application field and working principle of LL103C-GS18. The LL103C-GS18 diode is designed for use in DC to DC power conversion and in power electronics applications. It is a compact, low-loss, and high-efficiency rectifier that can be used in both commercial and industrial applications. Its small size makes it particularly suitable for applications where space is limited. It can also be used in rectifier circuits in automotive equipment and solar power applications. The LL103C-GS18 diode operates as a full-wave bridge rectifier. It is composed of four individual diodes connected in a bridge configuration. The two diodes on the left side of the bridge allow the current to flow from the positive side of the AC power source to the negative side. The two diodes on the right side of the bridge allow current to flow from the negative side of the source to the positive side. In full-wave rectifiers, the two halves of the AC waveform are converted into two DC signals that are out of phase with each other. The diodes connected in the bridge rectifier circuit produce two DC signals of equal magnitude but of opposite polarity from the same AC power source. This out-of-phase DC voltage is then combined and used to drive the load. The LL103C-GS18 rectifier has a nominal operating voltage of 100V and a peak reverse voltage of 400V. It has an insulation resistance of 1000 MegaOhm and a surge forward current capability of 16A. The diode is also fast switching, with a reverse recovery time of 18ns. It also has a low forward voltage drop, which makes it particularly suitable for high-efficiency power conversion applications. The LL103C-GS18 is a robust and reliable rectifier and is suitable for use in a wide range of applications. It is an excellent choice for power conversion and rectification applications, as it provides excellent performance over a wide operating temperature range. The diode\'s fast switching capabilities, low forward voltage drop, and high current-handling capabilities make it suitable for use in a variety of applications. In conclusion, the LL103C-GS18 diode is a single diode rectifier designed for use in DC to DC power conversion and in power electronics applications. It operates as a full-wave bridge rectifier and has an insulation resistance of 1000 MegaOhm and a voltage rating of 100V. Its small size makes it particularly suitable for applications where space is limited. It is also fast switching and has a low forward voltage drop and high current-handling capabilities, making it an excellent choice for power conversion and rectification applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description