LLG210D3L24-005

Series:	--
Part Status:	Active
Type:	Liquid
Output Type:	Switch
Output Configuration:	Push-Pull
Current:	7.5mA
Switch Actuation Level:	--
Mounting Type:	Threaded
Material - Housing & Prism:	Stainless Steel
Operating Temperature:	-40°C ~ 125°C
Voltage Rating:	8 V ~ 30 V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Float level sensors have a wide range of applications and provide an accurate non-contact level measurement. LLG210D3L24-005 is one of the most popular types of float level sensors, which has been widely used in industries such as food and beverage, medical, pharmaceuticals, water management, and chemical processing. This article will discuss the application field and the working principle of LLG210D3L24-005 float level sensor.

Applications

LLG210D3L24-005 float level sensors are mainly used to measure and monitor liquid levels in tanks, reservoirs, ponds, and other vessels. They can also be used to identify and detect the presence or absence of liquids in tanks and pipes. Additionally, these float level sensors can also be used in pump control systems, chemical feed systems, and irrigation systems to control the flow of liquids.

Working Principle

LLG210D3L24-005 float level sensors work on the principle of buoyancy. The sensor has a float that is attached to a sensor cap located at the end of a stem. The stem is connected to a reed switch housed within the sensor body. As the level of liquid in the tank changes, the float rises or falls along with the level of the liquid in the tank. This movement of the float causes the stem to move and cause the reed switch to open or close, depending on the direction of the movement. By controlling the current to the reed switch, the float level sensor is able to detect and accurately measure the liquid level in the tank.

Advantages

The LLG210D3L24-005 float level sensor has several advantages over other liquid level sensing technologies. Firstly, it is a low power device and uses minimal energy for operation. Secondly, it is a non-contact device and has no moving parts which makes it reliable and durable. Additionally, this float level sensor is offered at a low price which makes it a cost-effective solution for liquid level measurement. Finally, the sensor is easy to integrate with existing systems and can be installed without causing disruption to the system.

Conclusion

LLG210D3L24-005 is a popular float level sensor which has a wide range of applications in many different industrial settings. It works on the principle of buoyancy whereby a float is attached to a stem and a reed switch housed within a sensor body. As the liquid level changes, the float moves and the reed switch opens or closes, allowing for the detection and accurate measurement of the liquid level. The LLG210D3L24-005 float level sensor has several advantages over other sensing technologies, such as low power consumption, non-contact operation, and low cost. This makes it a cost-effective and reliable solution for liquid level measurement and monitoring.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description