LM2903VQDR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LM2903VQDR is a monolithic quad differential comparator IC and belongs to the Linear - Comparators family. It uses two separate voltage reference input pins – Vref- and Vref+. The IC can compare two differential reference voltages to determine the relative values and magnitude of these two signals. The LM2903VQDR comparator has an output voltage swing from -2.0 V to +2.0 V, with an open-drain transistor that can drive single-ended loads directly. Its input common-mode range extends from -2 V below the lower power supply rail to +2 V above the upper power supply rail. The LM2903VQDR is widely used in various electronic circuits and systems, such as temperature sensing and monitoring, battery charging, 5V/3V level translation, LED/LCD backlighting and motor/servo control.

The working principle of LM2903VQDR is based on the comparison of two input voltages. When Vref+ is greater than Vref-, the LM2903VQDR will pull the output voltage (at pin 6) high and drive the output transistor to turn on the load. When Vref- is greater than Vref+, the LM2903VQDR will pull the output voltage low, turning the output transistor off. This alternating high/low output voltage can be used to vary the load current, switch logic states, drive LEDs, etc. Furthermore, the IC\'s open-drain output can drive single-ended loads directly to reduce circuit complexity.

The differential inputs of the LM2903VQDR are designed to minimize voltage offsets. This feature is useful for ensuring that the output accurately follows the input. The comparator also features a hysteresis of approximately 50 mV, which helps eliminate switching noise due to small differences in the two reference voltages. Additionally, the LM2903VQDR has an internal temperature compensation circuit and a guaranteed output current of 25 mA, making it well-suited for temperature-sensitive applications.

The LM2903VQDR comparator is most commonly used as a temperature sensor in industrial temperature controllers, in order to detect temperature changes and initiate the protective measures. The open drain output of the LM2903VQDR can be used to drive a load or control a relay or other discrete load. Furthermore, the IC can be used in battery chargers to monitor the battery level and prevent overcharging and overheating of the battery. The comparator can also be used for 5V/3V level translation, LED/LCD backlighting, motor/servo control, and various other applications.

The LM2903VQDR is an extremely versatile and robust comparator IC that is used in a wide range of applications where rapid detection of small changes in the differential reference voltages is required. Its low input bias current, low price, and low power consumption make it an attractive choice for any system needing to measure small voltage differences. Furthermore, its open drain output and hysteresis capabilities make it suitable for use in noise-sensitive systems. The LM2903VQDR is a great choice for any application needing to measure a differential voltage rapidly and accurately.

The specific data is subject to PDF, and the above content is for reference