LM324AWDT

Series:	--
Part Status:	Active
Amplifier Type:	General Purpose
Number of Circuits:	4
Output Type:	--
Slew Rate:	0.4 V/µs
Gain Bandwidth Product:	1.3MHz
Current - Input Bias:	20nA
Voltage - Input Offset:	2mV
Current - Supply:	1.5mA
Current - Output / Channel:	70mA
Voltage - Supply, Single/Dual (±):	3 V ~ 30 V, ±1.5 V ~ 15 V
Operating Temperature:	0°C ~ 70°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LM324AWDT application field and working principle

LM324AWDT is a low-power quad operational amplifier, usually classified in the linear - amplifiers - instrumentation, OP Amps, Buffer Amps categories. It is a type of integrated circuit that consists of four independent operational amplifiers that are designed for high-speed applications. The LM324AWDT is specifically designed for battery-powered applications and can operate from a single or dual power supply voltages. In terms of performance, the LM324AWDT provides a gain bandwidth product of about 3.2MHz and a slew rate of 12V/μs. It also features low-input bias current, low operating current and temperature stability. Additionally, It has short circuit protection and its inputs are protected against accidental damage due to electrostatic discharge. Moreover, this device has a relatively low supply current which helps maximize battery life.The LM324AWDT is used in many different applications. It is often used in analog signal processing applications such as audio frequency amplifiers, light detectors, and comparators. Another popular application is in instrumentation systems that are used to measure properties such as temperature, pressure and voltage as well as to control various parameters such as altitude and attitude.The LM324AWDT also has a wide range of applications in the field of automotive electronics. It is used for temperature control, engine control, and in automatic transmissions. In addition, it is used in the control of ABS braking systems, airbags and in electronic stability programs. Furthermore, it is also used in fuel injection systems, alternators and spark plugs.The LM324AWDT also has many applications in industry. It is often used to control pumps, motors and valves. Additionally, it is used in process control systems to regulate flows and temperatures. It is also used in power inverters and switch mode power supplies. To understand how this device works, we must first look at the working principle of an operational amplifier. An operational amplifier is a closed-loop system with an open-loop gain, meaning that its output is dependent on the difference between its two inputs. The primary components of an operational amplifier are a differential input voltage, summing node and output. The differential input voltage is the voltage difference between the two inputs, which is then amplified. The amplified signal is then summed with the input signal at the summing node and the resultant output is fed back to the feedback loop. The LM324AWDT amplifies the differential input voltage while maintaining a low supply current. This is achieved by the use of a high-impedance input and the internal amplifier. Furthermore, it takes two or more power supply voltages for operation.To summarise, the LM324AWDT is a low-power quad operational amplifier, usually classified in linear - amplifiers - instrumentation, OP Amps, Buffer Amps categories. It is used in various applications such as automotive, audio, instrumentation and industry. This device has a relatively high gain bandwidth product of around 3.2MHz and a low-input bias current. It also has a low operating current and temperature stability. Additionally, it takes two or more power supply voltages for operation. The working principle of the LM324AWDT can be understood as an open-loop system with an internal amplifier and a high-impedance input.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description