LM46001QPWPRQ1 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LM46001QPWPRQ1 is a DC-to-DC switching regulator, specializing in providing low-voltage power supplies when starting up low-power circuits. The LM46001QPWPRQ1 is designed for efficient switching polarized power supply applications by providing a sense voltage that can be accurately adjusted over a wide range of input voltage. It offers excellent efficiency at light loads and has a built-in current-limited protection circuit.

The LM46001QPWPRQ1 utilizes a step-down topology, which allows a small, fixed output voltage to be maintained with varying input voltage. This regulator uses Pulse Width Modulation (PWM) to control the output voltage, and its frequency is adjustable. It employs a current mode design, which enables constant on-time operation, fast transient response, and programmable frequency.

The LM46001QPWPRQ1 also supports external synchronization, enabling it to synchronize with an external clock frequency—typically fixed at 60kHz—and can accept inputs from 6V to 36V. A maximum output current of 600mA is supported, and at light load, the internal linear regulator circuitry will reduce the output power supply voltage with less than 65mV ripple. This switching regulator has a minimum on-time of the control point of 18ns, and it provides sufficient adjustability of the output voltage.

The application fields of LM46001QPWPRQ1 can be quite diverse, ranging from power supplies for microprocessors to general-purpose, low-voltage regulators. Its small size and high efficiency makes it ideal for a variety of applications, such as in portable electronic devices and for powering embedded systems, where a compact and efficient regulator is required.

The working principle of LM46001QPWPRQ1 is based on PWM and current mode control. At the heart of the LM46001QPWPRQ1 is the Pulse Width Modulator (PWM) and the Current Mode (CM) circuit. The PWM circuit generates pulse width modulation (PWM) to control the output voltage. The PWM signal is then sent to the switch controller which is responsible for turning the power switch on and off. The CM circuit is used to set the current limit, and the current limit threshold is adjustable by the user. When the output voltage is low, it increases the duty cycle and thus increases the average current into the load. When the output voltage is too high, it reduces the duty cycle and thus decreases the average current into the load.

Additionally, the LM46001QPWPRQ1 utilizes a unique phase-shift soft-start method, which avoids inrush current problems while start-up, thus ensuring a smooth and gentle powering. The over temperature protection feature ensures that the switching regulator will not be damaged due to high-temperature, providing reliable protection for the load.

Overall, the LM46001QPWPRQ1 is an efficient and compact switching regulator that is suitable for a variety of applications. Its unique PWM and current mode control make it a popular choice for applications that require low-voltage, efficient, and noise-reduction operation.

The specific data is subject to PDF, and the above content is for reference