LMV324MT/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog devices like the LMV324MT/NOPB are common amongst Industrial and Automotive applications for various applications and for various reasons. As an Operational Amplifier (OP-AMP), the LMV324MT/NOPB is a single-channel continuous power enable/disable, low-voltage amplifier that offers rail-to-rail input range to support level shifting in automotive applications. It provides a single rail-to-rail input and output stage, differential input configuration, and low-noise performance. The LMV324MT/NOPB also features an input offset voltage of 0.1 mV, low power consumption, high gain accuracy of 2%, and better than 4.5nV / √Hz at 1kHz.

The LMV324MT/NOPB starts working the moment it receives an external enable signal. This signal must be at least 2V above the positive or negative supply well. It can be turn on and off again by toggling the enable signal. When the enable is asserted, the LMV324MT/NOPB will rapidly charge or discharge the output to its set input voltage depending on the amplifier configuration (inverting or non-inverting). The amplifier gain setting is set by external resistors and compensates for the signal loss due to the power supply.

Among the features of the LMV324MT/NOPB, it provides low offset voltage, low noise, high gain accuracy, low supply current consumption and the ability to be operated over a wide supply voltage range. Its wide supply range makes it suitable for automotive applications, as it can operate across a range of 6V-18V, and its low offset voltage makes it ideal for a variety of signal conditioning and level shifting applications.

In terms of noise performance, the LMV324MT/NOPB offers excellent overall noise performance, with a much better than 4.5nV/√Hz at 1kHz, employing no external components or trimming. Even when operating at high gains and high supply voltages, the noise is consistently low enough for the device to detect small amplitude signals.

The LMV324MT/NOPBs low current consumption makes it suitable for low-power applications, up to 6mA. It is made out of high-reliability components, so it has high reliability, and it is rated for both pre- and post-conditioning, meaning that the device can be used both before and after a conditioning circuit.

The LMV324MT/NOPB is a device typically used in industrial and automotive applications, especially those requiring level shifting. Its features, such as low offset voltage, low noise, high gain accuracy, low supply current consumption and the ability to be operated over a wide supply voltage range make it ideal for these kinds of applications. Due to its low current consumption, it is suitable for low-power applications.

The specific data is subject to PDF, and the above content is for reference