LMV358IDRG4

Current - Input Bias:	15nA
Base Part Number:	LMV358
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	2.7 V ~ 5.5 V, ±1.35 V ~ 2.75 V
Current - Supply:	210µA
Voltage - Input Offset:	1.7mV
Series:	--
Gain Bandwidth Product:	1MHz
Slew Rate:	1 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>The LMV358IDRG4 is a Low Voltage Rail-to-Rail Input and Output Operational Amplifier (Op Amp). It is used in applications such as amplifier circuits, current measurement, motor drivers, active filters, and data converters. This Op Amp offers high accuracy, low noise, low distortion, and low power consumption. </p><p>The LMV358IDRG4 is designed to operate from a single supply voltage or from dual supplies. It has a wide common-mode input voltage range that extends beyond the supply voltage. This amplifier provides high input impedance for both the inverting and non-inverting inputs, which ensures low power dissipation in the input circuit. </p><p>The output configuration of the amplifier allows it to drive highly capacitive loads with low distortion. The amplifier is designed to provide rail-to-rail performance, allowing it to easily drive its output to the supply rails. This feature is especially important in low voltage applications, where the voltage swing is often limited. </p><p>The LMV358IDRG4 has a wide bandwidth and a high slew rate that make it ideal for high speed signal processing applications. It can also be used in low noise, low power applications where the rail-to-rail performance and precision of the LMV358IDRG4 is desirable. The amplifier is available in both through-hole and surface mount packages, offering design flexibility and ease of assembly. </p><p>The LMV358IDRG4 is designed for linear applications, such as signal amplifiers and level translators, as well as instrumentation applications, such as signal generation, signal conditioning, and measurement amplifiers, among others. The amplifier also provides a high gain bandwidth product of 1.12MHz and can be used in voltage follower, active filtering, and high impedance conversion applications. </p><p>The LMV358IDRG4 operates using the typical common-mode feedback (CMFB) principle. On a CMFB amplifier, the inverting and non-inverting inputs are connected together, and this common terminal is the virtual ground of the circuit. The non-inverting terminal is the input of the amplifier and the inverting terminal is the feedback. The output of the amplifier is driven to ground if the input is at the same voltage as the feedback voltage. When the input voltage is higher than the feedback voltage, the output will move up so that the difference between the input and feedback is equal to the gain of the amplifier. Conversely, when the input voltage is lower than the feedback voltage, the output will move down. This process results in a closed loop system, which allows the output of the amplifier to track the input. </p><p>The LMV358IDRG4 offers many benefits to designers, including a wide common-mode input range, rail-to-rail output swing, low distortion, and low power consumption. The amplifier is versatile and can be used in a variety of applications, including instrumentation, signal conditioning, and amplifier circuits. This makes it an ideal choice for designers seeking precision and reliability in a low voltage and low power application. </p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description