Allicdata Part #: | 296-13815-5-ND |
Manufacturer Part#: |
LOG2112AIDW |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Texas Instruments |
Short Description: | IC OPAMP LOG 1.4MHZ 16SOIC |
More Detail: | Logarithmic Amplifier 2 Circuit 16-SOIC |
DataSheet: | LOG2112AIDW Datasheet/PDF |
Quantity: | 434 |
Series: | -- |
Packaging: | Tube |
Part Status: | Active |
Amplifier Type: | Logarithmic |
Number of Circuits: | 2 |
Output Type: | -- |
Slew Rate: | 0.5 V/µs |
Gain Bandwidth Product: | 1.4MHz |
-3db Bandwidth: | 45kHz |
Current - Input Bias: | 5pA |
Voltage - Input Offset: | 300µV |
Current - Supply: | 1.25mA |
Current - Output / Channel: | 18mA |
Voltage - Supply, Single/Dual (±): | ±4.5 V ~ 18 V |
Operating Temperature: | -5°C ~ 75°C |
Mounting Type: | Surface Mount |
Package / Case: | 16-SOIC (0.295", 7.50mm Width) |
Supplier Device Package: | 16-SOIC |
Base Part Number: | LOG2112 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
A LOG2112AIDW amplifier is a type of instrumentation amplifier that is designed to amplify signals while providing a high level of accuracy and repeatability. This type of amplifier is especially useful for signal processing applications that require linear amplification due to its low noise and high signal gain. It is also used in various other applications such as measuring the output of a thermocouple.
The LOG2112AIDW amplifier has two types of inputs - differential and single-ended. These inputs are connected to the amplifier circuit through a series of resistors. The resistors act as a feedback mechanism to increase the linearity of the signal by creating a fixed transfer function between the input and the output. The amplifier can be configured to amplify both the AC and DC components of the input signal, allowing for high sensitivity and accuracy.
The LOG2112AIDW amplifier works by using an input voltage to control the gain of the amplifier. This gain can be increased or decreased depending on the amount of input voltage used. This technique can be used to gain up or down the signal in order to make measurements more accurate or to optimize the gain for a specific application. The LOG2112AIDW is also capable of linear amplification over a wide range of frequencies, making it a good choice for applications that require a wide range of gains or sensitivities.
The LOG2112AIDW is also designed with low-noise and high-linearity features. This allows for higher accuracy and repeatability when measuring low-level signals. The amplifier also has wideband operation, which makes it well suited for many applications. Its wideband characteristics give it the ability to capture signals ranging from low frequencies to kilohertz and even more than one megahertz. Additionally, LOG2112AIDW amplifiers can be used to measure AC signals, which can be difficult with other types of amplifiers.
The LOG2112AIDW amplifier is a versatile and powerful instrumentation amplifier. It is used in a wide variety of applications, from low-frequency sensors to high-frequency data acquisition systems. Due to its low-noise and wideband characteristics, it can provide accurate and repeatable measurements for a variety of applications. It is also flexible, allowing for increased or decreased gain depending on the application and input signals.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
LOG2112AIDWR | Texas Instru... | -- | 1000 | IC OPAMP LOG 1.4MHZ 16SOI... |
LOG2112AIDW | Texas Instru... | -- | 434 | IC OPAMP LOG 1.4MHZ 16SOI... |
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...