LP060F33CDT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals possess the capacity to produce waves of a specific frequency, known as oscillators. The LP060F33CDT oscillator is a type of quartz-based oscillator that has various implementation applications. It has the desirable qualities of being highly accurate and stable, and it is also relatively inexpensive. This article will provide an overview of the features, applications, and working principle of this oscillator.

LP060F33CDT Features

This type of oscillator is composed of a hermetically sealed, TO-5 hermetic metal can package. It has a temperature stability of ±2.5 ppm over temperature range of -40℃ to +85℃, a maximum frequency tolerance of ±50 ppm, and a low ESR of max 40 ohm. The output frequency range is 12.0 to 52.000MHz, and it requires a voltage of 3.3 or 5.0V. This oscillator also consists of an enable/disable pin that can be used for latching, a pull control pin for controlling the frequency output level, and a Tri-state control pin for selecting either normal operating or power down mode.

LP060F33CDT Applications

The LP060F33CDT has several implementations. Its accuracy and stability make it a popular choice for use in industrial, scientific and medical equipment, such as for frequency references in the telecoms industry and PLL (phase-locked loop) timing circuits. It is also used in electronic test and measurement systems, such as a frequency counter or a time base. It can also be used in applications that require frequency-hopping, synchronous TDMA (time division multiple access) radio communications systems, cellular telecoms, and GPS receivers.

LP060F33CDT Working Principle

At the heart of the oscillator is a quartz crystal. The quartz crystal’s structure is such that when a voltage is applied to it, it vibrates at a frequency that is proportional to the applied voltage. This vibration can be used as an accurate time reference, as the frequency of vibration is very stable and consistent.

The quartz crystal operates in an open-loop system that consists of an oscillator, an amplifier, a capacitive feedback network, and a load. The oscillator generates an alternating voltage, which is amplified by the amplifier and applied to the load. The load is a device that converts the alternating voltage into a steady direct current. This direct current is then fed back to the oscillator, completing the open-loop circuit.

The capacitive feedback network acts as a filter, allowing only alternating current to pass through to the oscillator and dampening the unwanted frequencies. The LP060F33CDT oscillator uses a customized SAW (surface acoustic wave) filter to achieve the highest accuracy and stability possible.

In summary, the LP060F33CDT is a superbly accurate quartz-based oscillator that is utilized in various implementation applications. Its highly stable, accurate and economical qualities make it a popular choice for use in industrial, scientific and medical equipment.

The specific data is subject to PDF, and the above content is for reference