LP2995MX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to LP2995MX Application Field and Working Principle

The LP2995MX is a special type of power device, which falls into the category of power management integrated circuits (PMICs). It is a low power voltage regulator for mobile and portable applications. This device is specifically designed for battery-powered applications and has a wide range of output voltages. The LP2995MX is used in mobile phones, PDAs, portable disc players and other devices which require low power consumption.

The LP2995MX is a low dropout (LDO) voltage regulator that integrates high-efficiency, high-performance low-power features. This device has a low quiescent current, high output accuracy, and low output ripple. It also features low temperature coefficient, fast start-up time, and stabilized output voltage.

Features of LP2995MX

The LP2995MX offers a range of features and benefits such as:

• 8.2 V to 18 V input voltage range
• 500 mA maximum output current
• 50µA quiescent current
• +2.5% accurate output voltage.
• No secondary component required
• Low EMI generation
• Low Iq for battery-powered applications

Application Fields of LP2995MX

The LP2995MX can be used in many application fields such as:

• Portable applications
• Cellphones
• PDA\'s and other handheld devices
• Digital Still Cameras
• MP3 players.
• Medical instruments
• Computer motherboards
• Roboti cs

Working Principle of LP2995MX

The LP2995MX is composed of a voltage reference, an error amplifier, a voltage selector, and a power transistor. The power transistor is the output stage of the stabilizer. The error amplifier and the voltage selector are used to monitor and adjust the output voltage to keep it at the programmed value.

The voltage reference sets the reference voltage against which the output voltage of the voltage regulator is compared. This reference voltage is set by connecting the REF pin to a desired voltage source by using a resistor divider. The set voltage value is compared to the output voltage of the voltage regulator. If the reference voltage is higher than the output voltage, then the error amplifier increases the gate voltage of the power transistor, while if the reference voltage is lower, then the error amplifier reduces the gate voltage.

The voltage selector is used to control the output voltage. It can be used to select output voltages from 0.8V to 18V in steps of 250mV. The gate voltage of the power transistor is increased or decreased depending on the output voltage, which thus results in the output voltage being adjusted to the selected voltage.

Conclusion

The LP2995MX is a special type of integrated circuit device, designed to be used in mobile and portable applications where low power consumption is required. It is an LDO voltage regulator which has a wide range of output voltages, and offers many features such as low quiescent current, high output accuracy and low output ripple. The LP2995MX can be used in many application fields such as cellphones, PDAs, digital cameras and other portable devices.

The specific data is subject to PDF, and the above content is for reference