LSM545J/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LSM545J/TR13 diode is a single rectifier diode rated for low power (0.35A), medium voltage (400V) operation. It is designed for general purpose power conversion, both AC and DC. It can be used as a bridge rectifier, where two of the diodes are connected in series. It is an ideal choice for low power applications such as DC/DC converters, AC/DC adapters, and other low voltage/low wattage applications.

The LSM545J/TR13 is a Silicon-Controlled Rectifier (SCR). It is not a full-wave rectifier since it is only half-wave. It functions by using a diode-like junction, with a small amount of resistance or "gate." This gate can be opened and closed by the application of an electric current, allowing current to flow through the diode only when an external voltage source is present. This feature makes the SCR more efficient than other rectifier types, such as the Zener diode.

The LSM545J/TR13 has a rated voltage of 400V, and a peak current of 0.35A. It can handle up to 400V of peak inverse voltage (PIV), and can switch up to 3A of peak current. As a result, it is suitable for low voltage and low power applications. It is also suitable for use in bridge rectifiers, for rectifying either AC or DC currents.

The LSM545J/TR13’s operation is mainly dependent on the applied voltage. The voltage must be greater than the rated voltage in order for the device to conduct, and the current flow is determined by the applied voltage. The LSM545J/TR13 will not conduct if the voltage is below the rated voltage. To reverse the direction of current flow, the voltage must be reversed.

In addition, the device has an entry control, which is how the gate determines how much current will be allowed to flow through the device. The entry control is usually not adjustable, and is usually fixed to a certain current level. For example, in the case of the LSM545J/TR13, the entry control can be set to allow up to 3A peak current.

The LSM545J/TR13 can be used in a variety of applications such as DC/DC converters, AC/DC adapters, and other low voltage/low wattage applications. It can also be used in bridge rectifiers for rectifying either AC or DC currents. For example, the device can be used to build a full-wave bridge rectifier that can rectify AC mains voltage to a DC voltage for applications such as power adapters and chargers.

Overall, the LSM545J/TR13 provides a high level of performance and reliability in low power, low voltage applications and is suitable for use in both AC and DC applications such as bridge rectifiers, DC/DC converters, and power adapters. It is a reliable and widely used device, and has a variety of applications.

The specific data is subject to PDF, and the above content is for reference