LT1013ACN8#PBF

Series:	--
Packaging:	Tube
Part Status:	Active
Amplifier Type:	General Purpose
Number of Circuits:	2
Output Type:	--
Slew Rate:	0.4 V/µs
Current - Input Bias:	12nA
Voltage - Input Offset:	40µV
Current - Supply:	350µA
Voltage - Supply, Single/Dual (±):	4 V ~ 44 V, ±2 V ~ 22 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Supplier Device Package:	8-PDIP
Base Part Number:	LT1013

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1013ACN8#PBF is an instrumentation amplifier from Linear Technology, an American designer and manufacturer of power management, data conversion and interface ICs (Integrated Circuit). The LT1013ACN8#PBF device is generally used in combination with general purpose op-amps, buffer amplifiers or buffers for Signal Amplifying applications, Instrumentations and Audio Amplifying solutions. It is also suitable for precision automation and control systems, such as laboratory testing and monitoring circuits, as well as professional audio and telecommunication applications.The LT1013ACN8#PBF instrumentation amplifier has several functions to meet users’ requirements. It has a high-pass filtering featuring can filter out potential disturbances. It also provides several advantages such as wide input dynamic range (±200 mV), low noise and quiescent current, high output swing capability and low distortion due to its high open-loop gain.The LT1013ACN8#PBF amplifier is an integrated circuit prepackaged into a 8-pin plastic dual-in-line package (PDIP) for easy mounting and connection. It has a maximum power dissipation of 435 mW at the absolute maximum conditions. Since the LT1013ACN8#PBF is an integrated circuit, it comes with a few terminals: the power supply terminal, input terminals, output terminal, bias voltage, ground and inverting/non-inverting inputs. The input/output differential is rated for a maximum input voltage of ±200 mV.The working principle of the LT1013ACN8#PBF instrumentation amplifier is quite simple and straightforward. It consists of a differential input stage, which uses two transistors to amplify the input signals. Then the amplified signal is fed to a common-mode buffer amplifier, which is used to nullify any noise or interference. This buffer provides a high level of common-mode rejection, making it ideal for instrumentation systems. The input differential is then summed and sent through the output stage to the output terminal.The LT1013ACN8#PBF is ideal for Signal Amplifying applications, Instrumentations and Audio Amplifying solutions. The high input impedance can reduce any noise generated at the input stage, while the low quiescent current and power consumption make it suitable for portable and battery operated systems. Its wide input dynamic range and high open-loop gain make it an ideal choice for precision automation and control systems, such as laboratory testing and monitoring circuits, as well as professional audio and telecommunication applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description