Current - Input Bias:	40pA
Base Part Number:	LT1097
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	2.4 V ~ 40 V, ±1.2 V ~ 20 V
Current - Supply:	350µA
Voltage - Input Offset:	10µV
Series:	--
Gain Bandwidth Product:	700kHz
Slew Rate:	0.2 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1097CN8#PBF Application Field and Working Principle

Linear Amplifiers

Linear amplifiers are devices that increase the power of a signal while preserving the signal\'s shape and frequency. Linear amplifiers are generally used to amplify small AC and DC signals. The most common type of linear amplifier is the transistor amplifier, but other kinds of linear amplifiers exist such as A/D & D/A converters, operational amplifiers, and audio amplifiers. The LT1097CN8#PBF is a linear amplifier integrated circuit (IC) manufactured by Linear Technology that can be used in a variety of linear amplifier applications.

Instrumentation OP Amps

Operational amplifiers (op amps) are integrated circuits that are designed to amplify AC or DC signals. Op amps consist of one or more transistors, as well as resistors, capacitors, and diodes, which are connected in a specific configuration. Op amps are used for a wide variety of signal processing applications, including instrumentation, audio, and video.The LT1097CN8#PBF is an op amp designed for instrumentation applications. It is designed to amplify signals with high accuracy and provide low noise levels, even in the presence of large DC and RF signals. The LT1097CN8#PBF is a high-speed differential input operational amplifier with low current consumption and an internal shutdown mode.

Buffer Amplifiers

Buffer amplifiers are amplifiers that are used to isolate an input signal from external loads, as well as to "buffer" the signal from changes in the loading of the circuit or device. Buffer amplifiers are commonly used to boost low-level signals to higher power levels.The LT1097CN8#PBF is a buffer amplifier IC that can be used to isolate noisy electrical environments. The LT1097CN8#PBF is built with a low-noise input stage and high-swing output stage that provide both high accuracy and low noise. The LT1097CN8#PBF is designed to provide high accuracy performance in systems where externally-induced noise is expected to be high.

Working Principle

The LT1097CN8#PBF is a triple-input and single-output power amplifier IC. The LT1097CN8#PBF is comprised of three amplifier stages: an input buffer, an intermediate level amplifier, and a high-level amplifier. The input buffer is responsible for isolating the input signals from external loads and providing the necessary gain for the signal. The intermediate level amplifier serves to amplify the incoming signal to a higher voltage level, which is then further amplified by the high-level amplifier.The LT1097CN8#PBF is designed to achieve high accuracy performance, even in the presence of significant amounts of externally-induced noise. The LT1097CN8#PBF is able to do this due to its low noise input stage and high-swing output stage. The low noise input stage helps eliminate noise from the input signal before it is amplified, while the high-swing output stage provides more power and better fidelity in the output signal.In addition, the LT1097CN8#PBF is capable of operating in both shutdown and active modes. In shutdown, or power-saving mode, the LT1097CN8#PBF reduces its power consumption to a minimum. In active mode, the LT1097CN8#PBF is capable of delivering high accuracy performance.

Conclusion

The LT1097CN8#PBF is an integrated circuit designed for instrumentation, audio, and video applications. The LT1097CN8#PBF is a triple-input and single-output power amplifier IC that consists of three amplifier stages: an input buffer, an intermediate level amplifier, and a high-level amplifier. The integrated circuit is designed to amplify AC and DC signals with high accuracy and low noise. It is capable of operating in both shutdown and active modes, reducing its power consumption when necessary. The LT1097CN8#PBF is also able to provide protection for large amounts of externally-induced noise.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description