LT1112IS8#PBF

Current - Input Bias:	100pA
Base Part Number:	LT1112
Supplier Device Package:	8-SO
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	2 V ~ 40 V, ±1 V ~ 20 V
Current - Supply:	350µA
Voltage - Input Offset:	25µV
Series:	--
Gain Bandwidth Product:	750kHz
Slew Rate:	0.3 V/µs
Output Type:	--
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1112IS8#PBF Application Field and Working Principle

Introduction

The LT1112IS8#PBF is a high performance, low voltage amplifier that is well suited for a wide variety of applications. It has a wide range of operating conditions, high power-handling capabilities, high speed, low noise and low distortion. The LT1112IS8#PBF has an integrated power supply design, and also includes a slew rate of up to 30 V/ us and an exceptional common-mode rejection ratio (CMRR). This makes it a very versatile amplifier and it can be used in a wide range of applications. It is most commonly used in the fields of linear amplification, instrumentation amplifiers, operational amplifiers (Op Amps), buffer amplifiers and other applications in the aerospace, automotive and industrial sectors.

Application Fields

Linear Amplification

The LT1112IS8#PBF amplifier is well suited for linear amplification applications due to its low operating voltage, high power-handling abilities, high speed, low noise and low distortion performance. It can provide an outstanding signal-to-noise ratio (SNR) and a wide bandwidth of up to 100MHz. The amplifier is ideal for high quality audio, RF and microwave applications. It can be used for a wide range of applications including digital television and satellite radio receivers, medical imaging, test and measurement equipment and consumer electronics.

Instrumentation Amplifiers

The LT1112IS8#PBF is widely used in instrumentation amplifiers due to its exceptional common-mode rejection ratio and higher gain accuracy than most other op amps. The amplifier is commonly used in data acquisition systems, weighing systems, physical phenomenon measurements and bio-medical applications. It can help to reduce the system noise and errors, while providing a high degree of stability and accuracy.

Operational Amplifiers (Op Amps)

The LT1112IS8#PBF is ideal for use in operational amplifiers (Op Amps) due to its wide bandwidth and high power handling capabilities. The amplifier can be used to create gain blocks, current-to-voltage converters, active filters, signal isolators and signal mixers. It can also be used to provide high power handling, high speed and low noise performance in a wide range of Op Amp applications.

Buffer Amplifiers

The LT1112IS8#PBF is also a great choice for buffer amplifiers due to its wide range of operating conditions, higher gain accuracy than most other Op Amps, and the excellent common-mode rejection ratio (CMRR). It can be used in buffer amplifiers for a wide range of applications such as motor control, power management, motor driver and other power supply applications.

Aerospace, Automotive and Industrial Sectors

The LT1112IS8#PBF amplifier is also used in aerospace, automotive and industrial sectors due to its high power handling capabilities, high speed, low distortion, wide bandwidth and low operating voltage. The amplifier is often used in the aerospace, automotive and industrial applications to help reduce system size, weight and noise. It can also help to reduce power consumption and cost.

Working Principle

The LT1112IS8#PBF amplifier operates on a basic principle of biasing the output at a certain value and controlling the input in order to provide a stable and accurate signal to the output. The amplifier is configured in an emitter-follower configuration that uses an emitter-coupled pair of transistors. This configuration provides a high gain that can be further enhanced by adding additional resistive and capacitive components to the amplifier. The LT1112IS8#PBF can also be configured in a commonemitter configuration to provide additional gain.The LT1112IS8#PBF features two input pins that can be used for biasing the output of the amplifier. One pin is connected to the positive voltage rail, while the other pin is connected to the negative voltage rail. The two pins are connected to the two transistors in the amplifier in order to bias the output of the amplifier. The transistors in the amplifier are driven by the input voltage and will modulate the output voltage in response to the input signal. The amplifier is then used to amplify the input signal in order to create the desired output voltage.The LT1112IS8#PBF also features an integrated voltage reference (Vref) circuit that provides a reference voltage. This reference voltage is used to ensure that the output of the amplifier is stable and that the amplifier remains in a specified range. The voltage reference also helps to reduce the noise and distortion that can often be produced by the amplifier. The LT1112IS8#PBF also features an integrated power supply design, which allows the amplifier to operate at a low voltage while still providing the necessary power for the amplifier to operate.

Conclusion

The LT1112IS8#PBF is a high performance, low voltage amplifier that is well suited for a wide range of applications. It is most often used in the fields of linear amplification, instrumentation amplifiers, operational amplifiers (Op Amps), buffer amplifiers and other applications in the aerospace, automotive and industrial sectors. The LT1112IS8#PBF features a wide range of operating conditions, high power-handling capabilities, high speed, low noise, low distortion and an integrated power supply design. The amplifier operates on a basic principle of biasing the output at a certain value and controlling the input in order to provide a stable and accurate signal to the output. The LT1112IS8#PBF can be used in a variety of applications, including digital television and satellite radio receivers, medical imaging, test and measurement equipment, consumer electronics, data acquisition systems, weighing systems, physical phenomenon measurements and bio-medical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description