LT1114IN

Series:	--
Packaging:	Tube
Part Status:	Active
Amplifier Type:	General Purpose
Number of Circuits:	4
Output Type:	--
Slew Rate:	0.3 V/µs
Gain Bandwidth Product:	750kHz
Current - Input Bias:	80pA
Voltage - Input Offset:	25µV
Current - Supply:	350µA
Voltage - Supply, Single/Dual (±):	2 V ~ 40 V, ±1 V ~ 20 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Through Hole
Package / Case:	14-DIP (0.300", 7.62mm)
Supplier Device Package:	14-PDIP
Base Part Number:	LT1114

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1114IN is a high-performance operational amplifier with a wide range of applications. Its high output current allows it to easily drive capacitive loads and its low-voltage supply range makes it ideal for battery-powered applications. It is used as a signal amplifier, buffer amplifier and operational amplifier in instrumentation, signal processing and industrial control systems. It is also used in the design and implementation of various signal processing systems.The LT1114IN has a maximum slew rate of 500V/µs and a gain-bandwidth product of 8MHz. The internally compensated amplifier is designed to have good ac and dc performance. It has excellent dc precision, a low noise output, a high common mode rejection ratio and excellent trimmability.The LT1114IN has a wide operating voltage range, from 5V to 30V, and can be powered from any fixed or regulated power supply. Its relatively low input offset voltage, high common mode rejection and minimum input bias currents make it suitable for high-precision applications.Working principleThe LT1114IN operates on the principle of negative feedback. It amplifies the input signal and compares the output signal with the input signal by feeding the output signal back to the input. If the output signal is different from the input signal, the output will adjust accordingly to maintain a desired input/output ratio. The amount of feedback determines the degree to which the output will vary with the input signal. By controlling the amount of feedback, the gain of the amplifier can be varied. A lower feedback means a higher gain and vice versa.The LT1114IN has a high common mode rejection ratio, which means that an input signal will cause the output to move in the same direction, but not with the same magnitude. This allows the amplifier to cancel out spurious signals so that only the desired signal passes through.The LT1114IN is designed to be used in a wide variety of applications, from low-noise AC/DC waveform amplifiers to instrumentation amplifiers. It offers excellent performance, flexibility and reliability. Its high output current and wide operating voltage range make it suitable for a variety of battery-powered and industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description