LT1208CN8#PBF

Current - Input Bias:	4µA
Base Part Number:	LT1208
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	5 V ~ 30 V, ±2.5 V ~ 15 V
Current - Supply:	7mA
Voltage - Input Offset:	1mV
Series:	--
Gain Bandwidth Product:	45MHz
Slew Rate:	400 V/µs
Output Type:	--
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1208CN8#PBF – Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

The LT1208CN8#PBF is a high performance, low power single supply Rail-to-Rail input/output low noise Low-Power CMOS Operational Amplifier. The LT1208CN8#PBF has been designed for use in demanding Signal Chain applications which require a low power solution that does not compromise performance. The low input and operational noise, wide common-mode range and high-current output capability make the LT1208 an ideal amplifier for applications in audio, instrumentation, automotive, mobile, consumer and industrial markets.

Application Field of the LT1208CN8#PBF

The application field of the LT1208CN8#PBF covers a wide range of Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps. This includes low noise and high frequency applications such as filters, highly accurate amplifier systems, and high performance low power audio systems. The LT1208CN8#PBF can be used in industrial control systems and digital systems where precision, low power consumption and low cost are essential. It is also used for instrumentation applications such as sample-and-hold circuits, programmable gain amplifiers, oscilloscopes, data converters and power supplies.

Working Principle of the LT1208CN8#PBF

The working principle of the LT1208CN8#PBF is based on linear amplification of the input signal. It is designed as a voltage feedback amplifier with a high common-mode input voltage range, which exceeds the operating voltage range of the supply voltage. The LT1208CN8#PBF is ideal for use with standard CMOS digital logic and other devices with similar input levels. It has a wide gain bandwidth product and high common mode rejection ratio which makes it suitable for use in noisy and demanding environmental condition. The LT1208CN8#PBF has an input voltage range from -Vcc to Vcc and an output voltage range from -Vcc to Vcc.The amplifier consists of two differential-input amplifiers, connected in parallel to a common-mode feedback circuit, which shapes the gain and limits the output current. An input buffer amplifier is added to the input on each amplifier, which compensates for the voltage differences between the inputs. The outputs are cross-coupled for improved common-mode rejection and for reduced offset and gain errors over the input voltage range.The LT1208CN8#PBF has an excellent Common-mode Rejection Ratio (CMRR) and an Input Offset Voltage (VOS) of 1.2mV. The LT1208CN8#PBF is also designed to operate from a single-supply voltage as low as 2V. It has an excellent Power-Supply Rejection Ratio (PSRR) of 47dB.

Conclusion

The LT1208CN8#PBF is a high performance, low power single-supply Rail-to-Rail low noise Low-Power CMOS Operational Amplifier. It is ideal for use in demanding Signal Chain applications which require a low power solution that does not compromise performance. The LT1208CN8#PBF has been designed for use in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps applications and is capable of delivering excellent performance in noisy environments. It is also suitable for use in industrial control systems, digital systems and power supplies. The LT1208CN8#PBF has a wide gain bandwidth product, high common-mode rejection ratio, low input noise, wide input voltage range and excellent power-supply rejection ratio.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description