LT1460BIS8-5#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LT1460BIS8-5#TRPBF is a low-dropout, low-noise, micropower voltage reference integrated circuit. It was developed to simplify the design and lower the cost of precision voltage regulator systems. This voltage reference from Linear Technology not only eliminates the cost of additional components, but also significantly reduces system power consumption and board real estate. It is suitable for use in a wide variety of applications, including voltage reference systems, current loop systems, and power supplies.

At the heart of the LT1460BIS8-5#TRPBF is an ultra-low-dropout, low-noise voltage reference. This voltage reference circuit is composed of a temperature-stable bandgap reference, a current source, the chopping mode controller, and other passive components optimized for low power consumption. The output reference voltage is 1.24V, with a precision tolerance of ±0.4%. The device also provides a high level of linearity, ensuring excellent accuracy over the whole output voltage range. The advanced chopping mode controller and the trainable Bandgap enable the device to operate with a low quiescent current, down to 50nA.

The LT1460BIS8-5#TRPBF can be used in a variety of applications, such as periodic voltage reference systems, current loop systems, and power supplies. In voltage reference systems, the LT1460 can be used as either a single or dual voltage reference. In dual mode, two separate output voltages are independently adjustable and regulated, while in single mode, the voltage reference is provided by only one output. The dual mode is particularly useful in applications where two different reference voltages are required, such as a comparator and reference output on a data acquisition board.

In current loop systems, the LT1460BIS8-5#TRPBF can be used as a constant current source or sink. This is enabled by the device’s low-noise operation and fast settling time. The current loop system can be used to drive a current load, such as an LED, or to regulate a power supply. The current source and sink can be adjusted externally via a DAC or potentiometer, and the current will be held at a constant value.

The LT1460BIS8-5#TRPBF can also be used as a power supply regulator for low-power applications. The device’s low-dropout voltage allows it to efficiently regulate the output voltage even with input voltages that are up to 0.2V below the desired output voltage. The device can also be used as a power-on reset output when coupled with a voltage divider and MOSFET.

The LT1460BIS8-5#TRPBF is a versatile, low-power voltage reference that can be used in a variety of applications. It is capable of providing an output reference voltage of 1.24V with a precision tolerance of ±0.4%. Its low-noise, low-dropout operation make it ideal for use in current loop systems, voltage reference systems, and power supplies.

The specific data is subject to PDF, and the above content is for reference