LT3015EQ#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The Linear voltage regulators are widely used in applications where precise voltage levels are required and are usually used in battery-powered electronic equipment. The LT3015EQ#PBF is an example of such a linear voltage regulator which is a low dropout (LDO) regulator with adjustable output voltage range of 0.8 V to 5.5 V. It has a very low quiescent current of 14.5 μA, making it ideal for extended battery life applications. It also has a very high output current of up to 1.5 A and it can be used for powering up small and medium-sized load applications.

The LT3015EQ#PBF has a wide input voltage range of 2V to 8V which makes it suitable for different power supply voltage requirements. The output voltage of the device is adjustable with the help of an external resistor divider. The output voltage can be set to any voltage between 0.8V and 5.5V with a ±2% accuracy. The output voltage is very stable and is highly resistant to noise and fluctuations.

The LT3015EQ#PBF has a very low dropout voltage of 110mV. This makes it suitable for applications where a very low voltage difference is required between the input and the output voltage. Additionally, the device has an adjustable current limit feature which can help in protecting the device in case of heavy loads or if an overcurrent situation occurs. The device also has an in-built thermal shutdown feature which makes it more safe and reliable in cases of over-temperature conditions.

The LT3015EQ#PBF can be used for different applications such as battery-powered equipment, USB and modem power supplies, microcontroller and processor based equipment, industrial control boards, etc. The device is suitable for use in applications where a high output current is required and the output voltage needs to be adjustable. Plus, it has a very low quiescent current and a low dropout voltage which make it suitable for low power applications.

The working principle of the LT3015EQ#PBF basically relies on the concept of an operational amplifier. An operational amplifier is basically an integrated circuit used to amplify signals of varying strength. The basic idea of an operational amplifier is that it takes two inputs and produces a single output which is then used to regulate the output voltage. The inputs are the input voltage (Vin) and the output voltage (Vout) which is fed back to the input. An internal current source generates a reference voltage which is then compared to the output voltage. The output voltage is adjusted until the reference voltage matches with it.

The LT3015EQ#PBF has an additional feature of adjustment for current limiting. A resistor is linked with the ground and the current limit pin which can be used to set the current limit. When the output current of the device exceeds the set level, the device shuts down and the current limiting feature is activated. The output voltage is then maintained at the preset level until the output current drops to a lower level.

The LT3015EQ#PBF is an ideal solution for battery-powered equipment and other applications which require precise voltage levels. It has adjustable output voltage range of 0.8 to 5.5V, extremely low dropout voltage of 110mV, adjustable current limit, and very low quiescent current. The device works based on the principle of an operational amplifier, and it can be used for different applications.

The specific data is subject to PDF, and the above content is for reference