LT6018IS8E#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LT6018IS8E#PBF is a high-accuracy instrumentation amplifier that uses precision operational amplifiers for superior noise performance. The LT6018IS8E#PBF is designed for a wide range of applications, including thermocouple and RTD measurements, bridge excitations, bridge transducer amplifications, current shunt measurements, and strain gauge measurements.

The LT6018IS8E#PBF has a low input offset voltage of 10µV max, very low noise performance of 3nV/√Hz, and high common-mode rejection of 93dB at 1 kHz. It also offers excellent gain accuracy with better than 0.1% gains available, as well as low input bias current of 1 pA and low output offset voltage of 0.5mV/°C. The open-loop voltage gain is typ. 65 dB and the input bias current is typ. 1 pA. Other features include low distortion, low power consumption, and a high slew rate of 5V/μs.

The basic working principle of the LT6018IS8E#PBF is to convert a wide range of input signals into a precise electrical output signal. Each channel is optimized for current sources and their associated ranges, allowing the instrumentation amplifier to be used in a wide range of applications. The LT6018IS8E#PBF is designed to have a high common-mode rejection ratio (CMRR), which significantly reduces the effects of external noise on the circuit\'s output. Additionally, the LT6018IS8E#PBF is designed to be stable at high frequencies, ensuring that the output signal remains clean.

The LT6018IS8E#PBF is most commonly used in data acquisition systems, voltage regulation, current sensing, and sensors involving current to voltage conversion. It is also widely used in medical equipment, telecommunications, and audio applications. The high accuracy and low noise performance of the LT6018IS8E#PBF makes it an ideal choice for applications where precise measurements are required.

The LT6018IS8E#PBF is used in a variety of medical applications, including measuring ECG and EEG signals, measuring patient vital signs, and monitoring electrophysiological activity. It is also used for ultrasound imaging, for example in the design of fetal monitors and other medical imaging systems. In telecommunications, the LT6018IS8E#PBF is used to measure the signal strength of incoming and outgoing signals, allowing for better reception and transmission of digital data.

Audio applications for the LT6018IS8E#PBF include amplifying audio signals from microphones and other sound sources, such as musical instruments. The instrumentation amplifier is also used in audio power amplifiers, as it provides better amplification of the low-level signals with lower noise and distortion compared to non-inverting amplifiers.

The LT6018IS8E#PBF is a versatile instrumentation amplifier that offers high accuracy, low noise performance, and stability at frequency. Its high CMRR makes it an excellent choice for applications where external noise and interference must be minimized. Additionally, its low power consumption, low input bias current, and low output offset voltage make it suitable for a wide range of applications, including medical, telecommunications, and audio.

The specific data is subject to PDF, and the above content is for reference