LTC1098LCS8#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition – Analog to Digital Converters (ADC) technology has been widely used in industrial, commercial and consumer markets. The LTC1098LCS8#PBF chip is an 8-bit A/D converter IC with a resolution of 8-bits, a sampling rate of 80MHz, a switching frequency of 6MHz, and a full-scale current of 10mA. It is also equipped with a pre-programmed voltage reference which can be used as a supply voltage or as a foundation to develop more accurate reference voltages.

This chip is ideal for a wide variety of applications. In industrial applications, the chip can be used to create instrumentation systems with high accuracy, while in consumer electronics AF controllers, it can be used to control the volume, balance and treble bias levels. In addition, the chip can also be used in medical applications, such as electrocardiography systems.

The working principle of this chip is that it takes an analog voltage input and converts it into a digital representation using Pulse Code Modulation (PCM). It works by converting the analog voltage into a digital code, which is made up of 1s and 0s. This code is then converted into a number of bits which represent the analog voltage. Each bit is a representation of a voltage level, and the number of bits determines the accuracy of the conversion.

The LTC1098LCS8#PBF can be operated in both single-ended and differential input modes. In single-ended mode, it can accept signals between -1V and 1V with ±25 ppm of gain and offset error. In differential mode, it can sample up to 5V inputs. The LTC1098LCS8#PBF also features an input protection circuit that can protect the chip from overload or undervoltage conditions.

The chip features a built-in power-down feature that can be used to conserve power when the chip is not in use. When the power-down feature is enabled, the chip will halt its operation until it receives a power-on signal. This feature helps to increase the overall efficiency of the chip, as it eliminates the need for a separate power control circuit.

Overall, the LTC1098LCS8#PBF is a powerful 8-bit A/D converter IC with a resolution of 8-bits, a sampling rate of 80MHz, a switching frequency of 6MHz, and a full-scale current of 10mA. Its pre-programmed voltage reference allows it to be used as a supply voltage or as a foundation to develop more accurate reference voltages. Its single-ended and differential input configuration allows it to be used in a variety of applications. In addition, its built-in power-down feature helps to increase its efficiency, making it an economical choice for many applications.

The specific data is subject to PDF, and the above content is for reference