LTC1416CG#TRPBF Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADCs) play an important role in perceptual processing, precision measurement and signal transmission. The LTC1416CG#TRPBF is a segmented, wide range, 10-bit Analog to Digital Converter (ADC), capable of providing 10-bit resolution over a 24V range. It operates from a single +5V power supply and typically provides a 60μs settling time when used in the 12-bit mode. It includes a 3-state TTL/CMOS compatible output and an internal reference.

The LTC1416CG#TRPBF is capable of converting analog signals with a full-scale range of 24V into digital measurement values with a resolution of up to 10 bits. The 10-bit resolution allows accurate tracking of small signals in the presence of large-scale signals. It also has an internal 2V reference that can be used to calibrate the output to a known level. It includes an onboard 12-bit digital-to-analog converter (DAC), which enables it to be used in self-calibrating applications. Its integrated digital filter suppresses noise and improves the dynamic range.

The LTC1416CG#TRPBF has wide applications including in digital panel meters, data acquisition systems and digital control systems. It is also suitable for use in digital multiplexers, signal processors and analog/digital converters. It is designed to be compatible with both CMOS and TTL interfaces and has a 3-state output and an internal output latch. The device is also protected by an adjustable over-temperature protection that shuts down the converter if the temperature exceeds a certain limit.

The LTC1416CG#TRPBF operates in three power modes to optimise speed, power and noise. The Power Save Mode (PSM) allows the device to process up to 2.0V, providing a power saving of up to 20%. The Power-Down Mode (PDM) is used to decrease power dissipation, while in the High Speed Mode (HSM) the maximum resolution is achieved at the fastest speed. An internal trim capacitor ensures a consistent output level across all three operating modes.

The LTC1416CG#TRPBF is based on flash architecture and its working principle is straightforward. When it is powered up, the bias voltage applied to the input pins is converted into an internal bitstream. This bitstream is processed through an analog-to-digital converter and a digital-to-analog converter (DAC) before it is sent to the output. The output is then converted back into an analog signal and compared to the incoming input signal. If the output matches the input, then the conversion process is complete. The output is then latched and stored in an internal latch until the next conversion.

The LTC1416CG#TRPBF offers excellent accuracy and flexibility for a wide range of applications. It offers an adjustable, temperature-compensated reference and can operate from a single +5V supply. Its 3-state output enables it to be easily interfaced with TTL/CMOS logic, and its 10-bit resolution ensures accurate tracking of signals in the presence of large-scale signals. With its fast settling time and wide applications, the LTC1416CG#TRPBF is an excellent choice for a variety of data acquisition and signal processing applications.

The specific data is subject to PDF, and the above content is for reference