LTC1417CGN#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC) is an important component in the world of data capturing. As one of the most important ADC component products, LTC1417CGN#PBF has been widely used. This article will discuss its application field and working principle.

LTC1417CGN#PBF is a monolithic, high-performance, low-power, 10-bit analog-to-digital converter. It is a high-speed, microprocessor-compatible 10-bit ADC chip, operating from a single +5V supply, with standard latching inputs for easy systems interface. It implements a successive-approximation analog-to-digital algorithm that is flow-through latency-insensitive, and delivers 10-bit conversions from 1 MHz to 20 MHz, depending on the speed grade.

LTC1417CGN#PBF can be easily used for in-circuit testing, automotive system development, consumer electronics, and many other narrow-bandwidth applications. It is commonly used in medical systems such as blood-analysis machines, EKG, and medical scanners. It can also be used in industrial power control, inspection and measurement, home theater and audio/video applications, audio oscilloscope applications, and as a programmable gain differential amplifier.

The set up of the LTC1417CGN#PBF is straightforward, and the connections are simple. Its input and output pins are connected to the voltage levels required to measure the analog input. The chip is powered by a single +5V supply and is connected to the power and ground pins. All the latching inputs for triggering the conversions are connected to digital logic levels, and the output pins are connected to the input pins of the microprocessor, or other system devices.

The working principle of the LTC1417CGN#PBF is based on the successive- approximation algorithm. When the chip is triggered, the analog reference voltage is converted and compared to the analog input signal. The difference produces a digital conversion code, which is converted to a digital signal with the help of a digital-to-analog converter. When the chip is reset by the triggering signal, it starts the process all over again.

In addition, the LTC1417CGN#PBF has an analog-to-digital gain of 10 bits plus an offset adjustment of 4 bits. The analog-to-digital circuit has a signal-to-noise ratio of 52 dB and a total harmonic distortion of 0.30%. It has an input range of 1mV to 10V and a sampling rate of up to 20MHz.

In conclusion, the LTC1417CGN#PBF is a high-performance, low-power 10-bit analog-to-digital converter. It has a wide range of applications, such as medical systems, industrial power control, home theater and audio/video applications, and inspection and measurement. It can be easily set up and the connections are simple. Furthermore, its working principle is based on the successive-approximation algorithm, and its signal-to-noise ratio and total harmonic distortion are excellent. It is a trusted and practical ADC product.

The specific data is subject to PDF, and the above content is for reference