LTC1606ACSW#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADCs) have become ubiquitous in modern electronics. They are used to convert analog signals into digital data, enabling the data to be used in digital applications. The LTC1606ACSW#TRPBF is an ADC that is designed for low power applications. It provides two differential analog inputs and sample rates up to 200ksps, making it suitable for a wide range of data acquisition applications.

The LTC1606ACSW#TRPBF utilizes successive approximation register (SAR) architecture. This architecture converts the analog input signal into a 12-bit digital word by comparing it to a reference voltage. The reference voltage is generated using an on-chip low-noise bandgap voltage reference, which provides a stable reference voltage over a wide temperature and supply voltage range. The internal block diagram of the ADC is shown below.

The LTC1606ACSW#TRPBF provides two differential analog inputs, IN+ and IN-, which each have a full-scale input range of +/-VREF. It also has a single-ended analog input, IN, with a full-scale input range of 0V to VREF. The single-ended input is referred to as a comparator mode, since the single-ended input is compared to the reference voltage to determine the digital output value. The LTC1606ACSW#TRPBF also has two digital output modes, 12-bit parallel and 8-bit serial.

The LTC1606ACSW#TRPBF provides several features that make it well suited for low power data acquisition applications. It operates from a single 3V to 5V supply and draws only 420µA of quiescent current (typical). The ADC also has a low input bias current of 1pA (maximum), making it suitable for low power and high impedance sources. Additionally, the LTC1606ACSW#TRPBF has an on-chip phase lock loop (PLL) which allows it to operate at sample rates up to 200ksps without external clock sources.

The LTC1606ACSW#TRPBF is widely used in data acquisition applications, including medical imaging systems, industrial test equipment, and automotive sensors. It is also used in power monitoring and management applications, where it can be used to measure current, voltage, frequency, and other parameters. Additionally, it is used in smart energy systems, where it is used to measure power consumption and control energy usage.

Overall, the LTC1606ACSW#TRPBF is an ideal ADC for low power and low cost data acquisition applications. It utilizes SAR architecture, which provides low power operation and low noise operation. Additionally, it has an on-chip PLL that allows it to operate at sample rates up to 200ksps. Finally, it has a low input bias current, making it suitable for low power and high impedance sources. All these features make the LTC1606ACSW#TRPBF a versatile ADC for a wide range of data acquisition applications.

The specific data is subject to PDF, and the above content is for reference