LTC1821BCGW#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LTC1821BCGW#PBF is a low power and single channel Digital To Analog Converters (DAC) ICs (Integrated Circuits) family from the house of Analog Devices. It has 10-bit resolution and is one of the smallest, ultralow power DACs available today. This type of IC is ideal for battery-operated or portable systems.

The basic application field for LTC1821BCGW#PBF family is for use in solar tracking and battery-powered applications such as fuel gauges, motor control, energy measurement and battery charging. It can also be used in data acquisition systems, controlling voltage, current and temperature.

The main IC provides a complete 10-bit data to analog conversion. It also provides a Serial Peripheral Interface (SPI) interface which can be used to control external programmable functions. The SPI interface offers both 3-wire and 4-wire modes of operation.

The chip is designed to operate at temperatures between -40°C to +85°C and consumes less than 0.34 mW for the 10-bit analog to digital conversion. It has an on-chip reference voltage that can be adjusted by the user for different performance requirements.

LTC1821BCGW#PBF also has good accuracy with an offset voltage error as low as 0.5mV and a temperature coefficient of typically 0.01%/°C. It also has low impedance CDR (controlled via on-chip RESET/INIT pin) which ensures minimal distortion when used in Audio/Video DAC devices.

The working principle for LTC1821BCGW#PBF is simple. It provides a voltage reference for the 10-bit data input. The device then converts this data into a voltage at the output pin after going through an internal circuit called a Digital-to-Analog Converter or DAC. The DAC is an electronic circuit that takes a digital signal and creates an analog signal from it. This allows the device to produce an analog voltage output that is proportional to the binary data input. It also has an on-chip reference voltage register which can be programmed for different performance requirements.

Overall, LTC1821BCGW#PBF is a versatile Digital-to-Analog conversion IC that is small, low power and accurate. Its application areas range from data acquisition systems to portable systems. Its on-chip reference voltage register can be programmed to meet different performance requirements and its range is wide enough to allow for use in many different applications. Its 3-wire and 4-wire mode operation adds to its versatility and its low power consumption is ideal for battery powered systems.

The specific data is subject to PDF, and the above content is for reference