LTC2617IDE#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital to Analog Converters (DACs) are a type of electronics that convert digital signals into analog signals. TheLTC2617IDE#TRPBF is a high-performance, low-power DAC designed with the intention of automation and industrial applications.By leveraging on its versatile feature set, this DAC can be used to enhance multiple types of applications and projects.

The heart of the LTC2617IDE#TRPBF is its high-performance, CMOS-compatible, 13-channel, 12-/10-bit voltage output DACs. These channels provide maximum flexibility for controlling analog current or voltages over a variety of applications. The LTC2617IDE#TRPBF also features a low power mode, allowing for the DAC to consume less than 100µA of current and a power-on reset feature.

With its dual-mode interface, the LTC2617IDE#TRPBF can be controlled via either a 2-wire/3-wire serial interface or a 16-bit parallel. The 2-wire/3-wire interface allows for easy communication between the DAC and a microcontroller or peripheral devices. And the 16-bit parallel interface provides direct access to larger control points within the system such as 8-bit DAC DAC control registers and the Port A register.

The LTC2617IDE#TRPBF DAC also features an integrated temperature sensor which can be used to provide thermal feedback when operating in hot or cold-temperature environments. With its “Power Down” feature, the DAC can be quickly disabled while still providing the power needed to maintain reading and write operations in data acquisition systems.

The LTC2617IDE#TRPBF DAC can be programmed to produce a wide range of output voltages and currents. It has an adjustable output range of 0-2.5V, 0-5V, 0-10V, 0-3V, and 0-15V. It also features true rail-to-rail performance, allowing for a linear output voltage range of 0V to fully-active voltage. Additionally, the LTC2617IDE#TRPBF can be used in applications where the DAC needs to be programmed in increments of 1/8 V or 12 mV per bit between 0V and full-scale voltage.

The LTC2617IDE#TRPBF also features three-state outputs for both voltage and current outputs. This allows for compatibility with a wide variety of applications and projects. The Open-Drain output feature allows for the output to be triggered via input logic, making it ideal for applications that require a large number of output states. Finally, the DAC features oversampling and a low current noise to keep the signal accuracy high.

The LTC2617IDE#TRPBF is a versatile and feature-rich DAC. It is ideal for applications such as motor control, gamma correction, auto-calibration, voltage/current monitoring, and direct digital control. Its low power consumption, high-performance, and wide range of output voltages make it an ideal solution for many industrial applications. The LTC2617IDE#TRPBF is a high-performance, low-power digital-to-analog converter with numerous features and capabilities, making it suitable for many types of projects.

The specific data is subject to PDF, and the above content is for reference