LTC2635HMSE-LMI10#TRPBF

Reference Type:	External, Internal
Base Part Number:	LTC2635
Supplier Device Package:	10-MSOP-EP
Package / Case:	10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad
Operating Temperature:	-40°C ~ 125°C
Architecture:	--
INL/DNL (LSB):	±0.2, ±0.5 (Max)
Voltage - Supply, Digital:	2.7 V ~ 5.5 V
Voltage - Supply, Analog:	2.7 V ~ 5.5 V
Series:	--
Data Interface:	I²C
Differential Output:	No
Output Type:	Voltage - Buffered
Settling Time:	4.1µs (Typ)
Number of D/A Converters:	4
Number of Bits:	10
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital to Analog Converters (DAC)Data acquisition is the process of recording data from physical or digital sources. A digital-to-analog converter (DAC) is an electronic circuit that converts a digital signal into an analog signal. The LTC2635HMSE-LMI10#TRPBF is an example of a DAC specifically designed for applications such as automotive, consumer and industrial systems. It features an I²C or SPI serial interface and a ±10V output range.The DAC outputs a voltage corresponding to the digital word information presented at the DAC\'s digital inputs. It produces an analog voltage or current that directly corresponds to the digital code entered into the DAC. The small steps between digital word values are equally spaced and result in a linear analog output. This characteristic enables accurate analog output levels to be obtained without any voltage or current errors. The output range of the LTC2635HMSE-LMI10#TRPBF is up to ±10V.The LTC2635HMSE-LMI10#TRPBF is also capable of simultaneously updating multiple output channels. With a switching speed of 3µs, this makes it suitable for high-speed applications where quick response is needed. Decoded data is presented to the DAC by I²C or SPI serial interface, depending on the interface option selected. All bits enter the 17-bit DACs either directly, through a DAC shift register, or through a native I²C or SPI interface option allowing for very fast refreshing of all outputs.The LTC2635HMSE-LMI10#TRPBF also offers a choice of low power or high speed operation. It boasts an impressive 10nA low power mode, further enhancing its already energy-efficient design. An extensive range of features, including digital logic out (DLO) and chip select pin interface, make this a standout part for digital-to-analog conversion applications.The wide range of digital to analog converters available today allows system designers to match the right device to the right application. The LTC2635HMSE-LMI10#TRPBF offers a high performance, reliable solution for environments where accuracy and speed are essential. Due to its low power consumption, this DAC is attractive for use in battery-powered applications such as automotive, consumer and industrial systems. With its I²C or SPI serial interface and ±10V output range, the LTC2635HMSE-LMI10#TRPBF makes an excellent choice for digital-to-analog conversion projects.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description