LTC2900-1IMS#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LTC2900-1IMS#PBF is a digital supervisor (PMIC) from Linear Technology that uses a single I2C bus to monitor, detect, and report voltage, current, temperature, AC power failure and other important events in a variety of systems. The device is suitable for communication system applications, providing a wide range of features that enable the monitoring of different operating conditions. In this article, we will discuss its application fields and working principle.

Application Fields of LTC2900-1IMS#PBF

The LTC2900-1IMS#PBF is designed for use in applications such as server, storage and communication systems. It can be used in the monitoring of any type of power module, from the input source to the output side, including monitoring of intermediate bus voltages, multiple driver or load circuits, switch-mode power supplies, batteries and local area networks. In addition, it can be used in digital measurement and control circuits such as current/temperature/voltage/power controllers.

The LTC2900-1IMS#PBF has several features that make it particularly well suited for digital control applications. It is small and low-power, allowing it to be integrated into a variety of systems. It is also highly customizable and can be configured to meet the specific needs of an application. The LTC2900-1IMS#PBF also provides a wide range of event output signals, including reset, interrupt, power-good, power-fail, and power-on reset (POR).

In addition, the device offers a range of alarm outputs such as high voltage, low voltage, over temperature, open and short circuit, and over current. This allows it to act as an advanced safety and protection controller. The device also offers programmable over temperature and brownout detection, selectable trip points and hysteresis for monitoring of circuit changing conditions. Furthermore, it can be configured to output a wide range of display information, such as readings of supply voltages and currents, trip points and alarm thresholds.

Working Principle of LTC2900-1IMS#PBF

The operation of the LTC2900-1IMS#PBF is based on a combination of digital threshold detection and a voltage reference. The voltage reference provides a baseline to compare against each monitored voltage. If the monitored voltage exceeds or falls below the threshold level, then an alarm is triggered. Additionally, the device has other thresholds that can be set for other conditions such as over current.

The specific thresholds for the device are programmable by the user. The user can set the thresholds for each of the monitored voltages, as well as for over-current and over-temperature, so that the device can trigger alarms correctly. Furthermore, the LTC2900-1IMS#PBF can be configured to detect conditions such as brownout, ripple and overshoot, as well as other specific conditions, so that the system is protected from damage.

In addition, there are numerous other features of the LTC2900-1IMS#PBF device that allow it to be used in a wide range of applications. These include an internal watchdog timer to periodically check the output to ensure it is functioning correctly, multiple voltage and current levels that can be monitored, and a power supply fault detection circuit that can detect when the power supply has been disrupted.

The device also includes an internal temperature sensor and a serial port, allowing the user to monitor the device remotely. Furthermore, the device\'s performance can be improved by utilizing an external temperature sensor, allowing the user to monitor temperatures outside of the device.

Conclusion

The LTC2900-1IMS#PBF is a digital supervisor (PMIC) that offers advanced monitoring, detection, and reporting capabilities. It monitors power supply voltages, currents, and temperatures, and provides a wide range of customizable options for controlling and protecting system components. It also offers a range of event outputs, over temperature and brownout detection, selectable trip points, and various display options. Furthermore, the device has an internal watchdog timer, temperature sensor, and serial port to allow for remote monitoring.

The specific data is subject to PDF, and the above content is for reference