LTC3108IGN-1#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LTC3108IGN-1#TRPBF Application Field and Working Principle

The versatile LTC3108IGN-1#TRPBF has become a widely used integrated power management circuit in automotive, industrial, medical and consumer applications. It is a buck switching regulator, with a programmable constant-current generator, that is capable of providing low-voltage (up to 16V) and low-current (<5A) step-down DC/DC power supply solutions.

The LTC3108IGN-1#TRPBF can accept input voltage ranges from 6.0 V to 16 V, providing an adjustable output voltage range from 0.8 V to 5V. It offers a peak efficiency of 80%, up to 10-ms transient response, and low quiescent current operation of 200 uA in power-saving mode. The LTC3108IGN-1#TRPBF features internal fault protection and is offered in a thermal limited 16-lead plastic DFN package.

Applications

The LTC3108IGN-1#TRPBF is suitable for applications such as automotive systems, industrial control, medical electronics, battery-powered systems, and telecommunications equipment. It can be used to power a variety of circuits, including processors, controllers, FPGAs, switching amplifiers, and I/O circuitry. The device can also be used as a DC/DC step-down regulator for point-of-load uses such as powering fan motors/drives, LEDs, and other devices that require regulated output voltages. Additionally, the device is also used for powering a variety of low-power applications such as battery-operated systems and remote sensing applications.

Working Principle

The LTC3108IGN-1#TRPBF is a synchronous buck switching regulator, which consists of three main components: an inductor, a switch, and an output capacitor. The inductor is used to store energy, while the switch is used to control the flow of current between the input and output. The output capacitor helps to filter high-frequency noise, while also providing a stable output voltage.

The operation of the LTC3108IGN-1#TRPBF can be divided into five phases: power up, normal operation, overload, power-saving, and low-voltage shutdown. In the power-up phase, the LTC3108IGN-1#TRPBF will ramp up its output voltage until it reaches the set voltage. After that, in the normal operation phase, the LTC3108IGN-1#TRPBF will start providing a constant output voltage to the load. In this mode, the output voltage will remain at a constant level until current overload occurs or the input voltage is too low. In case of overload, the LTC3108IGN-1#TRPBF will enter the overload phase and will shut down to avoid damages to the system.

When the overload condition is cleared, the LTC3108IGN-1#TRPBF will switch to the power-saving mode, where it will reduce the current to lower level to save power. Finally, when the input voltage is below the minimum operating voltage, the LTC3108IGN-1#TRPBF will enter the low-voltage shutdown mode and automatically Turn OFF.

Conclusion

The LTC3108IGN-1#TRPBF is a versatile and powerful integrated power management circuit suitable for automotive, industrial, medical and consumer applications. With its high efficiency and wide adjustable output voltage range, the LTC3108IGN-1#TRPBF is ideal for powering a variety of circuits. Additionally, it also features overload protection and power-saving modes for an efficient, reliable, and safe power supply.

The specific data is subject to PDF, and the above content is for reference