LTC4217IDHC#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC4217IDHC#PBF is a particulate hot swap controller intended to be used in application fields such as consumer electronics, office automation, industrial equipment, and medical products. This product is a high-over current protection device utilized to monitor and control the power supply voltage. The device is capable of supplying up to 3.2A sourced or sunk current and allows for energy saving, efficient and reliable power supply control.

The device is a non-isolated linear regulator that includes an High-Side Load Switch (HSLS) and low-side MOSFET (LSM) for voltage regulation, current regulation and Over-Current Protection (OCP). The LTC4217IDHC#PBF also includes a 5V or 12V gate drive which can be used as a reference voltage, adjustable current limit and voltage tracking. Furthermore, the device also supports a wide range of input voltages, adjustable current and over-voltage protection capabilities.

The LTC4217IDHC#PBF is an integrated hot swap controller especially designed for demanding applications such as protected DC/DC converters and load switch modules. The device\'s key feature is its built-in over-voltage protection which relies on the internal MOSFET to ensure the maximum rated input voltage is applied to the load, while the HSLS provides a fast turn-on and off of the load switch if the over-voltage conditions occur.

The HSLS and LSM are driven by a low-current logic signal which is generated by the logic circuit. This logic signal is supplied to the logic input of the HSLS and LSM in order to control their conduction. The logic circuit is programmable with an adjustable current limit setting. This setting controls the voltage level of the logic signal which in turn affects the conduction of the HSLS and LSM.

In order to allow for a smooth transition of the hot swap controller, the adjustable current limit has an adjustable slew rate. This ensures that the HSLS and LSM will open and close in a timely manner to ensure a smooth transition. Moreover, the LTC4217IDHC#PBF device includes a voltage tracking feature which can be used to maintain a steady input voltage for the controlled load. The voltage tracking feature allows the hot swap controller to follow any changes in the input voltage and keep the load supplied with constant voltage.

The LTC4217IDHC#PBF device is also integrated with a fault status monitoring feature. This feature works together with the HSLS and LSM to constantly monitor the power supply and provide warning in case of an over current, over voltage or under voltage condition. When these conditions occur, the HSLS and LSM will open to isolate the load. Alternatively, the device can be set to latch-off and stay in this state until the fault conditions are cleared.

The application field and working principle of the LTC4217IDHC#PBF device can be summarized as follows. This device is an advanced hot swap controller designed to provide voltage regulation, current regulation and over-voltage protection and monitoring capabilities in applications such as consumer electronics, office automation, industrial equipment and medical products. The device features an HSLS, an LSM and an adjustable current limit setting for smooth transition, voltage tracking and fault status monitoring.

The specific data is subject to PDF, and the above content is for reference