LTC4415EDHC#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC4415EDHC#PBF is a dual ideal diode and PMIC-OR controller system. The device has been designed to provide protection to multiple power rails in high-power and high-voltage applications. This makes it ideal for industrial, automotive, and medical applications. The device also offers a wide operating temperature range and a low quiescent current for better efficiency.

The dual ideal diode is designed to protect multiple power rails from over-voltages and from over-temperatures. The diode acts as a failsafe when current exceeds the set limit. This protects the downstream components from being damaged. The device also provides reverse-current protection to the power rail. This prevents reverse currents from draining the power rail.

The PMIC-OR controller system is designed to enable simultaneous current sharing between multiple power rails. This is achieved by controlling the state of the power rail at any given time. The state changes are controlled by comparing the output load current against the load current limit. When the output current reaches the current limit, the controller will shut off the power rail and restart the load once the current has dropped below the limit.

Another feature of the device is the over-temperature protection. This is designed to shut off the power rail if the temperature gets too hot. The device has an onboard thermistor that is used to measure the temperature. When the temperature gets too high, the device will shut off the power rail automatically. This is an important feature, especially in high-power applications, as it ensures that the power rail does not get too hot, which can cause damage or failure of components.

In summary, the LTC4415EDHC#PBF is a dual ideal diode and PMIC-OR controller system. The dual ideal diode is designed to protect multiple power rails from over-voltages and from over-temperatures, while the PMIC-OR controller system is designed to enable simultaneous current sharing between multiple power rails. The device also offers an over-temperature protection, allowing it to protect the power rail from getting too hot. This makes it a great choice for high-power and high-voltage applications, including industrial, automotive, and medical applications.

The specific data is subject to PDF, and the above content is for reference