LTC4210-3CS6#TRMPBF

Programmable Features:	Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Base Part Number:	LTC4210
Feature Pins:	ON, TIMER
Supplier Device Package:	TSOT-23-6
Package / Case:	SOT-23-6 Thin, TSOT-23-6
Mounting Type:	Surface Mount
Current - Supply:	750µA
Operating Temperature:	0°C ~ 70°C
Current - Output (Max):	--
Voltage - Supply:	2.7 V ~ 7 V
Series:	--
Features:	Auto Retry
Applications:	General Purpose
Internal Switch(s):	No
Number of Channels:	1
Type:	Hot Swap Controller
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Mangement Integrated Circuits (PMICs) are devices used to manage power in an electronic system. PMICs use advanced digital control technologies to optimize power use and increase system efficiency. In PMICs, the LTC4210-3CS6# TRMPBF is one of the Hot Swap Controllers.The LTC4210-3CS6# TRMPBF is a Hot Swap controller for protecting printed circuit boards (PCBs) from excessive currents. It is designed to operate over a wide input voltage range from 4.5V to 36V and offers better hot-swap protection than traditional series FET solutions. Its 45V Sink-FET provides the superior power handling capability for up to +45V spikes. Besides, its fast response time and support for in-rush current and Hot Swap Overload Limit features make it an ideal solution for hot-swap applications.The architecture and working principles of the LTC4210-3CS6# TRMPBF are divided into two parts. First part is the protection circuit, which protect the board from overcurrents by sinking the overcurrents to ground. The second part is the control circuit, which monitors and controls current levels.The protection circuit is composed of an external current sense resistor, and two FETs connected in parallel. When current exceeds the set threshold level, the FETs will be turned on and the current will be directed to the ground and the power supply will be cut off.The control circuit consists of a comparator, an operational amplifier, a logic buffer, and a control register. The operational amplifier amplifies the input current signals from the current sense resistor and feeds them into the comparator. The comparator then sends a signal to the logic buffer which sends a signal to the control register. The control register uses this signal to set the threshold current level which activates the protection circuit.The operation of the LTC4210-3CS6#TRMPBF Hot Swap Controller, is designed to protect against damaging overcurrent conditions. It starts off in a dormant state and any hot-swap detect signal will cause it to be activated. After activation, the device will monitor the current through the supplies and sense resistor. When the sensed current exceeds the set threshold level, an internal FET will be turned off, cutting off power to the protected board.The LTC4210-3CS6# TRMPBF can be used in numerous applications such as: point-of-load power applications, board-to-board power transfer, industrial hot-swap applications, and consumer product designs. In addition, it is RoHS Compliant and fully qualified and it can operate at temperatures up to +125°C.In conclusion, the LTC4210-3CS6# TRMPBF Hot Swap controller is designed to protect against overcurrent conditions and meet the needs of numerous applications. Its wide input voltage range and superior power handling capability make it one of the most popular Hot Swap controllers for hot-swap applications. It is easy to use and provides stable operation. With its features and design, the LTC4210-3CS6# TRMPBF Hot Swap Controller is an ideal choice for protecting PCBs from excessive currents.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description