LTC485MJ8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LTC485MJ8 is a widely used IC for interface applications. It is a high-speed, self-timed, half-duplex transceiver chip which uses TTL and CMOS compatible inputs and outputs. It is designed for use in high-speed data communication applications such as remote keypads, bus mastering systems and high-speed data acquisition systems. This chip is also suited for interfacing between two or more microprocessors.

In terms of application field, LTC485MJ8 is suitable for serial bus systems and communication interface such as Ethernet, RS232, RS485 and CAN. It is also suitable for point-to-point and multi-drop communication links such as I2C, SPMI, UART and SPI. It is used in medical and industrial engineering for a variety of control, data acquisition, and monitoring applications.

As for its working principle, LTC485MJ8 is a bi-directional voltage level-shifter which can transmit and receive data of different logic topology over a serial communication line. It contains two buffers with 3-state outputs, two logic gates and two latches, all of which are combined to form a single IC. When the chip is connected to a serial communication line, the data can be transmitted and received consecutively over the line.

When used as a transmitter, the LTC485MJ8 sends out the data it receives from the input buffer on the serial communication line. The data is shifted out at the specified baud rate, and the output signal is latched so that it is transmitted at the desired level. When used as a receiver, the data sent on the serial communication line is captured by the input register and shifted into the same register. This data is then latched and sent to the output buffer for further processing.

The LTC485MJ8 is also suitable for both synchronous and asynchronous data transmissions. In the asynchronous mode, the LTC485MJ8 is able to receive data from either a serial clock or from an independent microprocessor. In the synchronous mode, the LTC485MJ8 receives data from the microprocessor for parallel transmission over the serial line.

In conclusion, LTC485MJ8 is a popular transceiver IC which is used in a variety of data acquisition, control and communication interface applications. Its versatility and ease of use makes it suitable for use in a wide range of industry applications. It is a robust, reliable, and cost-effective solution for serial data transmission.

The specific data is subject to PDF, and the above content is for reference