LTC6240HS8#PBF

Voltage - Input Offset:	50µV
Base Part Number:	LTC6240
Supplier Device Package:	8-SO
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	2.8 V ~ 6 V
Current - Output / Channel:	30mA
Current - Supply:	2mA
Series:	--
Current - Input Bias:	0.2pA
Gain Bandwidth Product:	18MHz
Slew Rate:	10 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	1
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC6240HS8#PBF is a high-performance, high-speed, single-channel Instrumentation Amplifier that is ideal for automotive, industrial, and consumer applications. It is a single-ended, 3-amplifier monolithic device that provides a low noise gain stage and a low-noise output amplifier. The LTC6240HS8#PBF is capable of providing a low-noise gain of up to 60dB, with a bandwidth of up to 3GHz, and is capable of operating down to -40°C.The LTC6240HS8#PBF has outstanding DC and large signal performance, including low noise (1.45nV/√Hz of the two independent amplification stages, matching the lowest equivalent input noise of any comparable product) and high gain accuracy (10ppm). It also features single-supply operation (up to 36V) and high common-mode rejection ratio (CMRR). The amplifier is also equipped with a low offset voltage (3mV max) and low drift over temperature (3µV/°C max).The LTC6240HS8#PBF has a variety of operating modes, including Rail-to-Rail Input, High Output Voltage (12V) and Ground Referenced Differential Inputs. The Rail-to-Rail Input mode allows the input signals to track the full signal range without signal clipping or distortion, while the High Output Voltage mode allows the output signal to travel to a high output voltage without losing gain accuracy. The Ground Referenced Differential Inputs mode allows for the input to be referenced to ground, instead of the supply rail, providing a measure of noise immunity and ease-of-use.The typical applications of the LTC6240HS8#PBF include data acquisition systems, instrumentation amplifiers, low-frequency signal processing, audio amplifiers, and power supply monitoring.The working principle of the LTC6240HS8#PBF is based on the concept of instrumentation amplifiers. An instrumentation amplifier is an operational amplifier (op amp) that is used to amplify a differential input signal. It consists of three op amps, with the input signal being applied to the noninverting input of the first op amp, and the output of the first op amp being connected to the inverting input of the second op amp, and the output of the second op amp being connected to the inverting input of the third op amp. The third op amp is the output amplifier, and the output of this op amp is the amplified signal. The gain of the amplifier is determined by the ratio of the resistances of the feedback resistors, and the common-mode rejection ratio (CMRR) is determined by the ratio of the resistances of the feedback resistors to the common-mode input resistance.The LTC6240HS8#PBF is designed to operate over a wide range of supply voltages, temperatures, and load conditions. Its robust design allows it to be used in many applications, such as automotive, industrial and consumer, where reliability is of utmost importance. The LTC6240HS8#PBF amplifier has high gain accuracy (10 ppm max) and high linearity (0.1 % error, 70 dB CMRR). It also has a low offset voltage (3 mV max), low noise (1.45 nV/√Hz), high output voltage (12 V), and low drift over temperature (3 µV/°C max).Overall, the LTC6240HS8#PBF, linear amplifier from Linear Technology can provide solutions to various tough engineering problems in auto, industrial and consumer applications. The amplifier has excellent performance for both DC and large signal operations, with a wide range of operating modes. The amplifier is designed for use over a wide temperature range and with a wide range of supply voltages, providing a versatile solution for many application needs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description