LTC6244HVCMS8#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC6244HVCMS8#PBF is a monolithic instrumentation amplifier from the family of linear, low-noise amplifiers, buffers, and op-amps. It is designed for use in applications that require a high degree of accuracy, such as instrumentation, audio recording, D/A conversion and signal conditioning. The amplifier has low noise and high linearity, making it ideal for signal amplifying, buffering, and sensing applications.

The LTC6244HVCMS8#PBF is a high-speed, wide-bandwidth, fully differential amplifier with differential inputs and single-ended outputs. Its operating temperature range is -40°C to 85°C. It features a low input offset voltage of just ±250µV maximum and high CMRR of 88dB at 1kHz. It also features low noise of 2.8nV/√Hz at 1kHz bandwidth, and a high output voltage swing of 4.5V on each side of the supply voltage. The amplifier also incorporates a power supply rejection ratio specification of 90dB. The amplifier can provide up to a gain of 40dB.

The amplifier is ideal for single-supply operation and is capable of operating from as low as 3.3V supplies and as high as 18V supplies. It can operate at a supply voltage as low as 1.5V, though the output voltage swing range is reduced in this case to a maximum of ±2V. Bandwidth is maintained well at low input offset voltages and high-speed performance is maintained over a wide range of supply voltages. The amplifier features an adjustable gain of +15dB to +65dB.

The amplifier is capable of running at very low input bias currents. It operates without the need for a negative power supply and is capable of supplying supply voltages up to 18V. It uses ESD protection diodes at the input and output to protect against damage due to electrostatic discharge. The amplifier can be powered both directly and indirectly through external components. The noise coefficient is extremely low and the frequency response is flat.

The working principle of the LTC6244HVCMS8#PBF is based on the use of a differential amplifier. The differential input is used to measure the voltage difference between two input signals. The output is then amplified by the gain provided by the amplifier. The amplifier has low noise, which makes it suitable for precise applications. The amplifier is powered by a single-ended supply voltage and is comprised of two stages. The first stage is a high-gain differential amplifier and the second stage is a low-gain voltage-gain amplifier. The two stages are connected together by a feedback network. The output of the amplifier is subsequently amplified by the feedback network.

Instrumentation amplifiers, such as the LTC6244HVCMS8#PBF, are used for precise signal conditioning, data conversion and D/A conversion. They are used in applications where a precise signal representation of an input is required. They are able to amplify signals accurately, with high linearity, and low noise. Instrumentation amplifiers are used for application areas such as medical instrumentation, audio recording, and control loops. They are also used in sensors and transducers for precise analog signal conditioning.

The LTC6244HVCMS8#PBF is an ideal amplifier for applications that require precision and high linearity. It features low offset voltage, low noise, high CMRR and wide bandwidth. Its wide operating temperature range makes it ideal for a range of applications. It is suitable for use in both single-ended and differential signal conditioning. It is a highly reliable amplifier that offers superior performance with low input bias current and excellent power supply rejection. It is ideal for a variety of instrumentation and audio recording applications, and is capable of providing a gain of up to 40dB.

The specific data is subject to PDF, and the above content is for reference