LV8491CT-TE-L-H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LV8491CT-TE-L-H (hereinafter referred to as “the controller”) is one of the motor drivers from the PMIC (Power Management Integrated Circuit) range of motor controllers, drivers and controllers. The controller is comprised of two main components, namely the input stage and output stage. The input stage typically contains linear or switching regulators and filters. The output stage mainly consists of the driver circuit and a control unit.

The main application field of the LV8491CT-TE-L-H is for controlling the speed and direction for two-phase brushless DC (BLDC) motors as well as three-phase AC inductive motors (ACIM motors). The controller is ideal for use in electronic motion control systems, such as robotics, CNC machinery, air conditioners, and appliances.

The working principle of the controller is as follows. First, the input stage converts an input voltage (VIN) into a lower output voltage (VOUT) needed to operate the motor. The output voltage is then supplied to the output stage, which utilizes a gate driver to drive the wires of the motor. The controller will then monitor the motor speed, direction, and position to adjust the motor speed accurately.

The controller incorporates a number of features for controlling the motor. It includes two pins for detecting current, a temperature sense port for over-temperature protection, and various voltage detection points. It also has a PWM control input and a fault monitor output. These features enable the controller to accurately control the speed and direction of the motor up to a certain set limit.

The controller can be configured to work in several operation modes, including forward, reverse, and open-loop. The controller provides a range of operation voltage and output current, which can be further adjusted by adding external resistors. The controller can also start the motor up to a certain speed. In addition, it supports several decoding methods, such as AIC (Absolute Involute Coding), CE (Count Edge), and IC (Incremental Count).

To run the controller, the system requires an eight-bit microcontroller. An RS-232 or CAN bus can be used to send commands to the controller set the current speed and direction of the motor. Additionally, the controller supports several start-up modes, such as Toff, S1, S2, and S32.

In summary, the LV8491CT-TE-L-H is a motor driver from the PMIC family of controllers, which can be used to drive BLDC and ACIM motors. It features an input stage to convert a VIN voltage to a lower VOUT voltage that is used to power the motor, as well as an output stage using a gate driver to drive the motor wires. The controller also incorporates several features for monitoring and controlling the motor, such as current and voltage detection, PWM control, fault monitor output, and various start-up modes.

The specific data is subject to PDF, and the above content is for reference