LVR008NS-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PTC resettable fuses are used to protect circuits from short circuit and overload conditions. They are different from ordinary fuses because they are re-useable. When a current overload or short circuit occurs, the PTC resettable fuse activates and interrupts the circuit, and then cools off until the circuit is reset. This allows it to be used to protect circuits without needing to be replaced. The LVR008NS-1 is a PTC resettable fuse from Littelfuse, Inc. designed to be used in a wide variety of applications.

The LVR008NS-1 is a one-time high-current thermal fuse rated at 8A that can be used in applications where line voltage must be present. The device is designed to have a low hold current of 40mA or less and a high current of 8A. It can be used in applications up to 8A, such as when multiple loads are connected in parallel. It is a 3-pin device that uses SMD technology to provide superior reliability and performance in a compact form factor.

The LVR008NS-1 works by using a special thermistor element built in to the device that is activated when the current exceeds the rated value. The thermistor’s resistance then increases, causing the current to be reduced until it returns to the normal operating level. The device then goes back to its original state, allowing the circuit it is protecting to work normally again.

The LVR008NS-1 is designed to be used in a variety of applications where line voltage must be present. It is especially useful in power supplies, DC-DC converters, and LCD TVs. The device is RoHS compliant and can be used in environmentally-friendly applications. It is a cost-effective solution when compared to traditional fuses, as it can be reset and reused without needing to be replaced.

In summary, the LVR008NS-1 is a PTC resettable fuse from Littelfuse designed to be used in a wide variety of applications. The device is rated at 8A and has a low hold current of 40mA or less, allowing it to be used in applications up to 8A that require line voltage. It works by using a special thermistor element that is activated when the current exceeds the rated value, reducing the current until it returns to the normal operating level. The device is RoHS compliant and is a cost-effective solution compared to traditional fuses.

The specific data is subject to PDF, and the above content is for reference