Allicdata Part #: | LX24232ILQ-TR-ND |
Manufacturer Part#: |
LX24232ILQ-TR |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Microsemi Corporation |
Short Description: | TRANSCEIVER |
More Detail: | LED Driver IC 32 Output Shift Register PWM Dimmin... |
DataSheet: | LX24232ILQ-TR Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Output: | -- |
Supplier Device Package: | 56-QFN (8x8) |
Package / Case: | 56-VFQFN Exposed Pad |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 85°C (TA) |
Applications: | Backlight |
Dimming: | PWM |
Frequency: | -- |
Current - Output / Channel: | 200mA |
Series: | -- |
Voltage - Supply (Max): | 3.6V |
Voltage - Supply (Min): | 3V |
Number of Outputs: | 32 |
Internal Switch(s): | No |
Topology: | Shift Register |
Type: | -- |
Part Status: | Last Time Buy |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
LX24232ILQ-TR is a Digital Step-Down Controller IC (PMIC) used for driving LEDs. It is a high efficiency, low power, low voltage LED driver which provides superior performance and reliability for LED lighting applications. The device supports many parameters and features for safer LED driving operations. In comparison to other LED drivers in the market, the LX24232ILQ-TR ensures lower cost, power savings, and improved accuracy. This PMIC can be used in many applications where constant current source is needed, such as LED lighting and general low voltage DC loads.
Specifications
The LX24232ILQ-TR is an AEC-Q100 qualified, low power, high efficiency PMIC which meets the requirements of the latest energy efficient systems. It has very low start-up current and a standby current of 0.05µA. The device can operate with a wide range input voltage range of 4.5V to 25V. It provides a constant current output up to 600mA. Its maximum power dissipation is 5W. The package type of the device is LEAD-FREE-EIAJ-Phenolic.
Features
- High efficiency for low power consumption - up to 96%
- Constant current output up to 600mA
- Wide range of input voltage from 4.5V to 25V
- Integrated internal compensation circuit
- Short circuit protection
- Under voltage lockout
- Soft start
- LED fault detection
Application Field
The LX24232ILQ-TR can be used in many applications such as commercial, industrial and outdoor LED lighting. It can be used in LED strips, LED street lights, LED signage and LED indoor lighting. With its high efficiency and wide range input voltage, it can be used in energy efficient systems. The device is also suitable for low voltage DC loads.
Working Principle
The LX24232ILQ-TR works by regulating the output current to a set current given by an external resistor. The device uses a peak current mode control scheme with Pulse Width Modulation (PWM). The regulator senses the output current using an external sense resistor. This sense resistor then provides a feedback signal to the internal regulator which is used to adjust the output current. In the event of a short circuit, the device enters into a protection state and shuts down the output. The device also features an Under voltage Lockout (UVLO) circuit and a Soft Start, protects against overvoltage and over temperature.
Conclusion
The LX24232ILQ-TR is a high efficiency, low power, low voltage LED driver which meets the requirements of the latest energy efficient systems. It is an AEC-Q100 qualified device with a high efficiency of up to 96% and a wide input voltage range of 4.5V to 25V. The device performs various safety functions such as short circuit protection, under voltage lockout, soft start and LED fault detection. It is suitable for many applications such as commercial, industrial and outdoor LED lighting, and low voltage DC loads. The device uses a peak current mode control scheme with PWM to regulate the output current.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SSB-LX2450SYW | Lumex Opto/C... | 2.32 $ | 1000 | 5X20MM 4 CHIP LIGHT BAR 5... |
SSL-LX2473GD | Lumex Opto/C... | 0.32 $ | 1000 | LED GRN DIFF 3.9X1.9MM RE... |
SSB-LX2400YW | Lumex Opto/C... | 1.3 $ | 70 | LED LT BAR 5X10MM 2CHIP Y... |
SSL-LX2473AD | Lumex Opto/C... | 0.0 $ | 1000 | LED AMB DIFF 3.9X1.9MM RE... |
SSL-LX2473PGD | Lumex Opto/C... | 0.0 $ | 1000 | LED GRN DIFF 3.9X1.9MM RE... |
SSL-LX2473YD | Lumex Opto/C... | 0.0 $ | 1000 | LED YLW DIFF 3.9X1.9MM RE... |
SSB-LX2450YW | Lumex Opto/C... | 1.06 $ | 1000 | LED LT BAR 5X20MM 4CHIP Y... |
SSB-LX2400SYW | Lumex Opto/C... | 1.46 $ | 1000 | 5X10MM 4 CHIP LIGHT BAR 5... |
SMF-LX240IID-TR | Lumex Opto/C... | 0.61 $ | 1000 | LED 3MM 635NM RED DIFF RA... |
LX2406IDD-TR | Microsemi Co... | 0.0 $ | 1000 | TRANSCEIVERLED Driver IC ... |
LX24132ILQ-TR | Microsemi Co... | 0.0 $ | 1000 | TRANSCEIVERLED Driver IC ... |
LX24232ILQ-TR | Microsemi Co... | 0.0 $ | 1000 | TRANSCEIVERLED Driver IC ... |
LX2410AILD | Microsemi Co... | 4.1 $ | 1000 | ACTIVE BYPASS DEVICESolar... |
LX2410AILD-TR | Microsemi Co... | 1.8 $ | 1000 | ACTIVE BYPASS DEVICESolar... |
LX2400ILG | Microsemi Co... | 0.0 $ | 1000 | DIODE GEN PURP 24V 25A 2L... |
IC LED DRVR LIN DIM 25MA 28TSSOPLED Driv...
IC REGULATORLED Driver IC 1 Output DC DC...
IC REGULATORLED Driver IC Output Dim...
IC LED DRIVER OFFL DIM 16SOICLED Driver ...
IC LED DRIVER CTRLR DIM 64TQFPLED Driver...
IC LED DRIVER RGLTR 36VCSP50L3LED Driver...