| Allicdata Part #: | LX7001CLP-ND |
| Manufacturer Part#: |
LX7001CLP |
| Price: | $ 0.00 |
| Product Category: | Integrated Circuits (ICs) |
| Manufacturer: | Microsemi Corporation |
| Short Description: | IC CIRCUIT UNDERVOLT SENSOR TO92 |
| More Detail: | Supervisor Open Drain or Open Collector 1 Channel ... |
| DataSheet: | LX7001CLP Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Series: | -- |
| Packaging: | Tape & Box (TB) |
| Part Status: | Obsolete |
| Type: | Simple Reset/Power-On Reset |
| Number of Voltages Monitored: | 1 |
| Output: | Open Drain or Open Collector |
| Reset: | Active Low |
| Reset Timeout: | -- |
| Voltage - Threshold: | 4.6V |
| Operating Temperature: | 0°C ~ 70°C (TA) |
| Mounting Type: | Through Hole |
| Package / Case: | TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) |
| Supplier Device Package: | TO-92-3 |
| Base Part Number: | LX7001 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The LX7001CLP is a PMIC (Power Management IC) Supervisors. It’s used for monitoring a voltage level to prevent the voltage from dropping below or going above the cut-off voltage. It is designed to protect IC’s from high or low voltage conditions and is primarily used in medical, industrial, automotive, and communications applications.
The LX7001CLP has a wide input voltage range from 2.7 to 5.5V, and is an LDO (low-dropout regulator) regulator with logic output. Its voltage supervision level range is adjustable between 1.71V and 5.5V. The LX7001CLP also provides an over-voltage protection with adjustable level range up to 6.04V.
This PMIC Supervisor provides two different output configurations. One is the Open Drain (Active Low) output, while the other is the Push Pull (Active High) output. Both configurations provide The delay time before the supervisor trips is also adjustable from 16.7ms to 3584ms.
The LX7001CLP works in a similar fashion to other PMIC Supervisors. The inputs are monitored and when one of the conditions is reached (e.g. voltage is too low or too high) the supervisor trips and the output goes low or high accordingly. This is useful for preventing devices from being damaged by over-current or over-voltage events.
The LX7001CLP application field encompasses a variety of industries and applications. It can be used to monitor a DC voltages in medical, industrial, automotive, and communications. It is ideal for monitoring voltages in battery powered devices and providing momentary over-voltage protection. It can be used in LED controls and LED displays, and to protect against transients in automotive switch power supplies.
The LX7001CLP is a great solution for applications demanding a low cost multi-purpose PMIC supervisor. Its wide voltage range and adjustable delay time make it a perfect solution for monitoring voltages and providing over-voltage protection. It can be used in a variety of industries and applications, making it easily adaptable for different needs.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| LX7001IDM | Microsemi Co... | 0.0 $ | 1000 | IC CIRCUIT UNDERVOLT SENS... |
| LX7001CLP | Microsemi Co... | 0.0 $ | 1000 | IC CIRCUIT UNDERVOLT SENS... |
| LX7001ILP | Microsemi Co... | 0.0 $ | 1000 | IC CIRCUIT UNDERVOLT SENS... |
| SSB-LX7003SIW | Lumex Opto/C... | 7.48 $ | 1000 | 70X3MM C.O.B. LIGHT BAR 6... |
| LX7001CDM | Microsemi Co... | 0.0 $ | 1000 | IC CIRCUIT UNDERVOLT SENS... |
IC BATTERY BACKUPSupervisor Channel
VOLTAGE DETECTORSupervisor Open Drain or...
IC VOLT DETECTOR TO-92-3Supervisor Open ...
IC VOLT DETECTOR TO-92-3Supervisor Push-...
IC SUPERVISOR MPU 4.65V WD 8SOICSupervis...
IC SUPERVISOR 2.9V 4-USPSupervisor Open ...
LX7001CLP Datasheet/PDF