LY4I4-DC24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LY4I4-DC24 is a 4PDT power relay with an inductive load rating of 2.4A. This power relay is designed to provide overload protection in applications such as motor starting, electronic control, lighting control, and electromechanical switching. The power relay features a current rating of 2.4A and a voltage rating of 24V DC.

The LY4I4-DC24 is a four-pole, double-throw (4PDT) relay, which means that it has four electrical circuits that can be switched on or off. The first two poles, labeled “N.O” and “N.C”, stand for normally open and normally closed, and they refer to the factory default state of the relay when it is not energized. The last two poles, labeled “C1” and “C2”, are for control connections, and they are used to switch the other poles on or off. The LY4I4-DC24 also has a built in self-holding feature, which allows the relay to “lock” itself in the on or off position. This prevents it from bouncing back and forth due to sudden voltage changes.

The LY4I4-DC24 is most commonly used for motor starting applications, but it can also be used in a variety of other control and switching applications. It is typically used to switch a large current, such as an AC motor, but it can also be used for smaller current applications, such as switching between two different voltage sources. It can be used to switch between two lighting circuits, or to control a large number of small, low-voltage circuits.

The power relay is designed to safely switch large amounts of current and to protect against over-voltage or overload conditions that can occur during motor starting or other high-current applications. It is designed to activate quickly and reliably, and it is rated to switch currents of up to 2.4A. The power relay features a dielectric strength of 4.2kVAC, a pick-up voltage of 0.2V, a drop-out voltage of 0.8V, and an operating temperature range of -40°C to +85°C. The power relay is also UL, CSA, and VDE approved.

The LY4I4-DC24 is a reliable and cost-effective solution for a wide range of power relay applications. It is versatile and can be used in a variety of switching and control applications, including motor starting, electronic control, lighting, and electromechanical switching. The power relay is designed to activate quickly and reliably, and it is rated to switch currents up to 2.4A. It is also designed to provide overload protection in the event of over-voltage or overload conditions that can occur during motor starting or other high-current applications. The power relay is UL, CSA, and VDE approved.

The specific data is subject to PDF, and the above content is for reference