M10578-A2 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF receivers are essential to many modern communication systems. They are used in a variety of applications ranging from radio broadcasting to satellite communication. The M10578-A2 is one such receiver that is commonly found in today’s communication systems.

The M10578-A2 is a wideband receiver designed for frequency hopping signal reception. This type of signal reception is commonly used in spread spectrum communication systems such as digital data and video broadcasting. The M10578-A2 was designed to give the receiver a frequency hopping rate of up to 10 MHz and a wide dynamic range. By using frequency hopping, the receiver is able to receive data and video signals over a wide range of frequencies with minimal interference.

The M10578-A2 is powered by a 13A power amplifier and a 13B gain control amplifier. These amplifiers provide the required input signal level and gain control for the receiver. The M10578-A2 has a tracking filter, which allows for instantaneous frequency changes while maintaining signal integrity. The signal is then sent to the low noise amplifier (LNA) where it is amplified and then sent to the signal extracting mixer. The mixer performs the frequency-domain conversion from RF to baseband and the signal is then sent to the IF amplifier for further processing.

The M10578-A2 receiver has an internal digital signal processor (DSP) which performs most of the signal processing operations on the received signal. These operations include automatic gain control, frequency demodulation, error correction, and signal analysis. The DSP will also calculate the signal input power level, signal-to-noise ratio, and other important performance metrics. This processor will also perform enhanced signal filtering and noise reduction. The DSP also has a built-in frequency synthesizer, allowing it to tune itself to the appropriate frequency in frequency hopping systems.

The M10578-A2 receiver is also equipped with a wide range of interfaces for connecting to other devices. These interfaces include I2C, SPI, UART, and GPIO. This allows for easy integration with other systems such as transceivers, modems, and processors. It also has a software development kit, which allows developers to create custom applications for the receiver.

The M10578-A2 receiver is widely used in various communication systems due to its excellent performance and ease of use. It is well suited for applications in fields such as digital video broadcasting, satellite communication, wireless LANs, and many other applications. Its wide range of features makes it an attractive choice for a variety of communication systems.

The specific data is subject to PDF, and the above content is for reference