M15733/44-0001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters (LC, RC networks) are components of electronic circuits which reduce the conducted Electro-Magnetic Interference (EMI) and Radio-Frequency Interference (RFI) levels to comply with various regulatory requirements. One such component is the M15733/44-0001 EMI/RFI filter. This component is specifically designed to help protect sensitive electronic devices from interference caused by switching power supplies.

The M15733/44-0001 EMI/RFI filter has several features which set it apart from other filters. It has an EMI-reduction rating of 50dB, which is higher than most other components. The filter has a maximum current rating of 7 amps at 150kHz, and has a minimum common-mode impedance of 150nH in both directions. It is also highly resistant to mechanical damage and is capable of operating at temperatures of up to 70 degrees Celsius.

The working principle of the M15733/44-0001 EMI/RFI filter is based on two main components: the common-mode choke and the common-mode capacitors. The common-mode choke, also known as a common-mode inductor, is responsible for suppressing common-mode currents in the circuit. This is done by forming a large electromagnetic field around the inductor which attracts any stray electromagnetic energy in the circuit. The common-mode choke also serves to limit the amount of current which can pass through the device, so as to further reduce EMI levels.

The other main component of the M15733/44-0001 EMI/RFI filter is the common-mode capacitors. These capacitors are responsible for suppressing the differential-mode currents in the circuit. This is done by providing an equal and opposite electrical field to any conducted electrical noise which passes through the device. The two fields then cancel each other out, effectively reducing the amount of interference in the circuit.

In addition, the M15733/44-0001 EMI/RFI filter also includes a third component - an electrostatic discharge suppression device. This device is responsible for providing additional protection against ESD-induced damages, which can occur in the event of a surge in power. The device works by providing a low-resistance shunt path around the filter, allowing any surplus energy to be quickly dissipated.

The M15733/44-0001 EMI/RFI filter is an ideal choice for use in power conditioning applications where high amounts of immunity to conducted EMI/RFI is required. The filter is designed to provide maximum protection against interference by using a combination of common-mode choke and capacitors, as well as an electrostatic discharge suppression device. The filter is also highly resistant to mechanical damage, and is capable of operating at temperatures of up to 70 degrees Celsius.

The specific data is subject to PDF, and the above content is for reference