M15KP64A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (transient voltage suppression) diodes, also known as clamp diodes, are semiconductor devices used to protect various electronic circuits from electrical overstress caused by lightning strikes, electrostatic discharges (ESD), or other similar voltage spikes. One commonly used TVS diode is the M15KP64A. This article will discuss the application fields and working principle of the M15KP64A.

The M15KP64A is a carbon-monoxide-based high-temperature gate TVS diode designed for IEC level 3 ESD protection for printed circuit boards and in-line automotive applications. It has a bidirectional capability of 15kA peak current and is rated for up to 8kV surge immunity. The M15KP64A is designed to reduce the size and number of discrete components needed for circuit protection while meeting the requirements of Automotive SPICE-PP (process quality assessment) and ASIL-D safety levels.

Due to its high current and voltage ratings, the M15KP64A is well suited for automotive electronics, power supplies, computers, consumer electronic circuits, and communication equipment. It is commonly used in automotive systems, such as control units, solenoid valves, and actuators, to protect against ESD and other over-voltage events. It is also used in IT systems, such as computers, network routers, and modems, to provide protection from electrical surges.

The M15KP64A is designed as a two-way protection device. It has two diodes connected in series, one with a reverse voltage of minus 12 V and one with a reverse voltage of positive 12V. The function of the diodes is to block any transient over-voltage signal from entering the protected circuitry. The device also contains a nonlinear resistance, which is essentially a thermistor, that serves to limit current transients and reduce the voltage to a safe level. The thermistor acts as an overcurrent protection device, reducing the current to safe levels when the voltage is high.

The M15KP64A also contains a series of transistors that act as a voltage clamp. These transistors are connected in parallel with the two diodes and are used to regulate the current flow and reduce the overvoltage signal before it can enter the protected circuitry. This clamping action serves to reduce the potential damage to the circuitry.

In summary, the M15KP64A is a high-temperature gate TVS diode designed for automotive and IT circuit protection. It has a bidirectional peak current rating of 15kA and can handle up to 8kV surge immunity. The M15KP64A contains two diodes connected in series, a nonlinear resistance, and a series of transistors that act as a voltage clamp. It is used in a variety of applications to provide protection from electrical overstress due to lightning strikes and electrostatic discharges.

The specific data is subject to PDF, and the above content is for reference