M25P16-VMN6P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

M25P16-VMN6P is a Flash memory storage device. It is a versatile non-volatile memory, used extensively for applications ranging from small embedded systems to portable machine-to-machine applications. The device has a capacity of 16 Megabits, which is enough to store a variety of data, including program code, variable data and parameters.

The M25P16-VMN6P operates as a serial device, communicating with the internal microcontroller through SPI (serial peripheral interface) protocol. This protocol is widely used to provide a simple, low-cost interface between microcontrollers and peripheral devices such as memories and sensors. The SPI bus is full-duplex, allowing simultaneous communication in both directions. It has two clock signals and two data lines, plus a select line which is used to select the device from a number of devices connected to the bus.

M25P16-VMN6P is available in a range of packages and pin counts. Available package options include an 8-pin SOIC, 8-pin DIP and a 8-pin Wafer-Level Chip Scale Package (WLCSP). The device is ideal for embedded applications where space is a premium. The device features a wide operating voltage range of 1.65V to 3.6V, making it suitable for both 3.3V and 5V applications.

The M25P16-VMN6P is designed to meet the industry’s highest requirements. It comes with a range of features such as advanced write protection, program suspend function, hardware write protection and sectors protection. The device is designed to be resistant to shock, vibration, illumination and extreme temperature ranges. SPI Clock speeds up to 33 MHz are supported. In order to improve the speed of execution, the device supports a single-bit-issue instruction set.

The M25P16-VMN6P is targeted at a range of applications, including consumer electronics, automotive, industrial, medical, and many more. Its widely used include portable applications such as fitness devices and wearables, home and office automation, audio and video streaming devices, avionics, and more. The device is perfect for medical and automotive applications, where its features ensure reliability and performance in mission-critical systems.

Memory is the primary function of M25P16-VMN6P. Non-volatile solid-state memory, specifically Flash memory, is the ideal solution for applications that require data storage and quick access. The device can be used to store both write-once, read-many (WORM) or read-write data. Flash memory is highly reliable and has a long service life due to its ability to withstand many cycles of data writes and erases.

The M25P16-VMN6P is designed to minimize power consumption and extends battery life in portable applications. It uses a low standby current of 1uA and supports Deep Power Down (DPD) mode. The device is also designed to operate in a wide temperature range of -40°C to +85°C.

The device supports fast access times, with Read access times of 0.7us for 512 bytes and Erase access times of 32us for 4 Kbytes. The device also supports an end-of-transfer (EOT) command, which sets the SPI bus to a low-power idle mode as soon as the data has been accessed. This helps to minimize power consumption and maximizes system efficiency.

The M25P16-VMN6P is an ideal memory solution for a wide variety of applications. Its features and small size make it perfect for portable and embedded applications where space and power are at a premium. The device’s low power consumption and fast access times make it an ideal choice for mission critical applications.

The specific data is subject to PDF, and the above content is for reference