M27C256B-10C6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The M27C256B-10C6 is a 256 Kbit (32K × 8-bit) memory device from the family of CMOS ICs. It is also known as an EPROM (Erasable Programmable Read Only Memory). These devices are especially useful for applications that require non-volatile storage for holding recallable information for a long period of time – even when the power supply is switched off. The CMOS ICs that form the M27C256B-10C6 family offer very high density and low-power consumption.

The M27C256B-10C6 device has a memory array of 32K x 8-bit organization. It is divided into four sectors, each composed of 8K x 8-bit and can be programmed individually. The M27C256B-10C6 also comes with a pin-out that consists of 8 address lines (A0 to A7) and 8 data lines (D0 to D7). The address lines are used to identify the locations in the memory, while the data lines are used to carry data. The device also contains other control signals such as Output Enable (OE) and Chip Enable (CE). The OE signal is used for reading/writing data from/into the memory, while the CE signal is used for selecting the device.

The M27C256B-10C6 device has two basic modes of operation. The first mode is known as the "Read Mode" and this is the mode used when the user is accessing data from the memory. In this mode, the CE signal will be asserted (i.e., enabled) and the OE signal will be deasserted (i.e., disabled). This will allow the user to access the data stored in the memory. The second mode is known as the "Write Mode" and this is used when the user is writing data into the memory. In this mode, both the CE and OE signals will be asserted (i.e., both enabled), allowing the user to store data into the memory.

The M27C256B-10C6 device can be used in a wide variety of applications such as embedded systems, industrial control systems, automotive systems, consumer electronics, medical systems, and telecommunications. It is suitable for applications where large amounts of non-volatile memory are required, such as consumer electronics and automotive systems. The device is also often used in applications that require high-density storage as it can provide high storage capacity in a small size.

The M27C256B-10C6 device is a reliable and efficient way of storing data that needs to be recalled even when the power supply is off. The device is easy to use, can be programmed and accessed quickly, and provides high-density storage in a small size. It is an ideal choice for applications that require non-volatile storage.

The specific data is subject to PDF, and the above content is for reference